Lenshead Type B (CHARCOAL) (rebuild with greebles)

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
I have now returned to this project once again.

Here is the next section of the arms.
Section SIX (ARM 2 components).jpg

As you can see, I have raised some of the panels to add an extra layer of depth.
20200828_212005.jpg

20200828_212017.jpg

20200828_212047.jpg

20200828_212109.jpg

20200828_212138.jpg

20200828_212242.jpg

Here are of the finished components to the arm section.
20200828_212427.jpg

The arm section is assembled.
20200829_081932.jpg

Both sections are assembled.
20200927_133143.jpg

20200927_133207.jpg

20200927_133222.jpg

Next will be the hands.
 

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
Here is a link for a Lens Head model I found. It's the Lens Head Recon version. I also found a "Type B". Version. I may upload these here? Can't do that, it's against the designers wishes......Oh well.

I do have all four. It would be up to individuals to share these models, as they were once available with no strings attached, it can't be done on this forum though, to make it clear. ;)




LD.jpg

TYPE B.jpg
 
Last edited:

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Hey Chris, take a look

That looks FANTASTIC! Even though, there are some minor differences, he and I are building it pretty much in the same fashion.
I have to say. I really like the diorama.
Thank you very much for sharing this with us!
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Thank you for the suggestion. I have thought about "playing" with different clear coats to see which one works the best for my needs.
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Here are sections 7 & 8 (Elbows and Hands)!
Section SEVEN (ELBOWS & HANDS).jpg

Starting with the hands, Here are the parts.
20200927_151055.jpg

The parts are assembled (with some extra added details).
20200928_163730.jpg

Here is the completed hand.
20200928_164701.jpg

20200928_164715.jpg

20200928_164736.jpg

Both hands are assembled.
20200929_162913.jpg


Here are the parts for the elbow.
20200929_163922.jpg

The parts are assembled (with some extra added details).
20201002_201625.jpg

Here is the completed elbow.
20201002_201838.jpg

Both elbows are complete.
20201002_201917.jpg

Now moving on to the shoulder bands and assembly of the arms.
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Here is the arm assembly!
Section EIGHT (ARMS ASSEMBLED).jpg

Here are the parts for the shoulder band.
20201002_202638.jpg

The shoulder band is complete. I lined the inside so that no "white" would be showing. I wanted the part to look like it was made from one single piece of metal.
20201003_132251.jpg

20201003_132306.jpg

20201003_132321.jpg

Both shoulder bands are complete.
20201004_114118.jpg

20201004_114143.jpg

Here are all of the components for the arms.
20201004_120808.jpg

Starting to assemble the arms.
20201004_130436.jpg

20201004_130742.jpg

20201004_130813.jpg

The arm is fully assembled.
20201004_131152.jpg

Both arms are complete.
20201004_132649.jpg

20201004_132741.jpg

20201004_132857.jpg

Now on to the torso sections.
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Here is section 10 (CHEST)
Section TEN (CHEST).jpg

Here are the parts for the chest.
20201005_104443.jpg

Here are the parts for the main torso.
20201006_102530.jpg

The main toro is assembled. As you see, I have added a few greebles and augmented a few areas.
20201008_204322.jpg

20201008_204336.jpg

20201008_204353.jpg

20201008_204709.jpg

20201008_204727.jpg

20201008_204740.jpg

Here are the connector pieces for the waist.
20201009_135651.jpg

20201009_135752.jpg

20201009_135802.jpg

20201010_093856.jpg

I raised the center piece and the screws.
20201010_160400.jpg

20201010_160821.jpg

On to more of the assembly of the chest.
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
These are the parts for the chest plate.
20201012_081621.jpg

I laminated the top and bottom ends to 4mm thick. I also laminated a piece for the end. This will help give strength and rigidity to the part.
20201013_122106.jpg

I added an extra spiral of cardstock inside the former.
20201013_122139.jpg

20201013_122148.jpg

Both chest plates are assembled. I raised the square for the entrance for the arm socket.
20201013_150907.jpg

I raised the front panels and the pieces that connect them.
20201013_150931.jpg

These are added parts that go on the chest plate.
20201013_151010.jpg

I laminated the side pieces to 2.5 mm thick.
20201013_193001.jpg

20201013_192949.jpg

Both pieces are assembled.
20201013_215104.jpg

20201013_215122.jpg

Here are all of the componentes for the chest.
20201013_220934.jpg

Starting assembly.
20201013_221851.jpg

20201013_221903.jpg

20201013_222500.jpg

The chest is fully assembled.
20201013_223357.jpg

20201013_223910.jpg

20201013_223931.jpg

On to section 11 (waist)
 
Top