Detailed Thunder Fighter Project

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Here are more photos of the cockpit interior.

The Joystick is fixed and in place
IMAG4405.jpg IMAG4406.jpg IMAG4407.jpg IMAG4408.jpg

The rear console is in place.
IMAG4409.jpg
 
Last edited:

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Now for the upper skin and attaching the cockpit.
IMAG4426.jpg IMAG4427.jpg IMAG4428.jpg

Here is a close-up of the detail on the tail end.
IMAG4429.jpg IMAG4431.jpg

I have attached the upper skin to the rest of the plane.
IMAG4432.jpg IMAG4433.jpg


Please stay tuned to your local Earth Directorate Broadcasting channels for further updates as they happen.
Thank you for watching.
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Here are some more detailed photos of my build.

Here are the front side controls.
IMAG4434.jpg

I recessed the screens.
IMAG4435.jpg

I decided to greebble this part out to give it some physical detail.
IMAG4436.jpg IMAG4437.jpg IMAG4438.jpg

I completely detailed the rear end.
IMAG4439.jpg IMAG4440.jpg IMAG4441.jpg IMAG4442.jpg

ENJOY!!!

Up next will be the engine exhausts.

Please stay tuned to your local Earth Directorate Broadcasting channels for further updates as they happen.
Thank you for watching.
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
When you assemble these pieces, do you typically glue parts 178-180 together FLAT, and then roll them, or do you roll them individually THEN glue them? And I assume that 181 is a joining strip?

I rolled each part individually and the assembled the parts together and then once the glue is dry, I will give it a second roll.

Just take it slow and easy, when assembling them, so that way, everything lines up properly.
 

Revell-Fan

Co-Administrator
Staff member
Administrator
Moderator
That's the way I do it, too. Moreover, I leave the piece intact at first. After the first roll I cut the white rectangles out. That prevents the tiny strips between the cutouts from being damaged during the roll. If you glue the parts together flat it will be very difficult to roll the part and may cause undesired side-effects (wrinkles and creases). :)
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Thank you all for the kind words and encouragement.
I GREATLY APPRECIATE IT!!!
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Here are the engine exhausts.

I have added as much detail as I possibly could in an attempted to make them as close to being screen accurate as possible.
IMAG4443.jpg IMAG4445.jpg

As you can see, I took the "star" grill (that you see on the original plane) and attached it at the end so that it can be seen (like it the studio version).
IMAG4446.jpg IMAG4447.jpg

One exhaust is finished.
IMAG4448.jpg IMAG4449.jpg

Both are now finished.
IMAG4453.jpg IMAG4454.jpg
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
I have attached to exhausts to the main body of the plane.
IMAG4455.jpg IMAG4456.jpg IMAG4457.jpg IMAG4458.jpg

Now on the the wings and landing gear.

Please stay tuned to your local Earth Directorate Broadcasting channels for further updates as they happen.
Thank you for watching.
 
Top