Build thread:Canon EOS Kiss Digital

Discussion in 'Everything else' started by imavingalaughaswell, May 15, 2008.

  1. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    After my first attempt at a camera build,thread here http://forum.zealot.com/t159154/
    Time for my second canon camera build..

    Going to add a lot more photos this time to make it more interesting to look atsign1

    Just printing the pages of now ready to start..

    Forgot to add this..

    I'm using what is labled as "250 gsm" card for the build..

    not sure what the converts to?

    To Be Continued
  2. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    Update

    OK here we go.

    The Canon EOS Kiss Digital is available in two colors Black and Grey,I have chosen the Grey one because the print quality was better on my printer.

    This time i have decided to take a lot more photos of the build..

    First is part 1:- Cut out rough
    [​IMG]

    Then cut properly:-
    [​IMG]

    Before the next step i went around ALL the edges with a grey felt tip pen

    Then folded:-
    [​IMG]

    I then went around any exposed edges after folding with the grey felt tip pen

    On to part 2:- Cut out rough
    [​IMG]

    Then cut properly:-
    [​IMG]

    Before the next step i went around ALL the edges with a grey felt tip pen

    Then folded:-
    [​IMG]

    Felt tip time again!

    Join part 1 to part 2:-
    [​IMG]

    Again felt tip time
    *NOTE* Parts 1 and 2 now become part A

    One to part 3:- Cut out rough

    [​IMG]

    Then cut properly:-
    [​IMG]

    Again felt tip time.

    To be continued.....
  3. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    Update time

    time for an update,As i said in first post ,lots of photos!!

    Part 3 folded:-
    [​IMG]

    Felt tip time!

    On to part 4,cut rough:-
    [​IMG]

    Then cut properly:-
    [​IMG]

    Felt tip time

    Then folded:-
    [​IMG]

    Felt tip time

    Join part 3 to part 4:-
    [​IMG]

    On to part 5,cut rough:-
    [​IMG]

    Then cut properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    On to part 6,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join part 5 to part 6:-
    [​IMG]

    Onto part 7,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join parts 5/6 to part 7:-
    [​IMG]

    Onto part 8,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]


    To be continued...
  4. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    Update time

    Another update....

    Join parts 5/6/7 to part 8:-
    [​IMG]

    On to part 9,cut rough:-
    [​IMG]

    then cut properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join parts 5/6/7/8 to part 9:-
    [​IMG]

    Join parts 3/4 to parts 5/6/7/8/9:-
    [​IMG]

    This then becomes Part B

    Onto part 10,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Onto part 11,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join part 10 to part 11:-
    [​IMG]

    Onto part 12,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join parts 10/11 to part 12:-
    [​IMG]

    Onto part 13,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join parts 10/11/12 to part 13:-
    [​IMG]

    Onto part 14,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join parts 10/11/12/13 to part 14:-
    [​IMG]

    Onto part 15,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join parts 10/11/12/13/14 to part 15:-
    [​IMG]

    This becomes part C


    To be continued....
  5. CJTK1701

    CJTK1701 Banned

    Joined:
    Dec 13, 2006
    Messages:
    1,183
    Likes Received:
    0
    Sorry, I saw Kiss and thought you were going to build the Demon from KISS! sign1

    You're building a paper camera? Looks good so far, very clean.:thumb:
  6. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    Update time

    Okies and so it continues.....

    Onto part 16,cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Onto part 17, cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join part 16 to part 17:-
    [​IMG]

    Onto part 18, cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded(Has to be made to final shape in next step):-
    [​IMG]

    Join part 16/17 to part 18:-
    [​IMG]

    Onto part 19, cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Onto part 20, cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Onto part 21 (2 Needed), cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Onto part 22 (4 printed,but only 2 needed due to thicknes of card used),cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Join part 21 to 22 (do 2 times):-
    [​IMG]

    Onto part 23 (2 needed), cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded (same as part 21):-
    [​IMG]

    Join parts 21/22 to part 23 (2 needed):-
    [​IMG]

    Onto part 24 (2 needed), cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Join part 24 to the bottom of parts 21/22/23:-
    [​IMG]

    *Note* there should now be 2 of the above assemblies.

    Join part 21/22/23/24 to part 19:-
    [​IMG]

    Join parts 21/22/23/24 to part 20:-
    [​IMG]

    Join parts 19/21/22/23/24 to part B:-
    [​IMG]

    Join parts 20/21/22/23/24 to part C:-
    [​IMG]

    Join part B to part A:-
    [​IMG]


    To be continued......
  7. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    Update time

    Another update...

    Join part D to parts A/C:-
    [​IMG]

    Another view:-
    [​IMG]

    Join Part B to parts A/C/D:-
    [​IMG]

    This now becomes part E

    Onto part 25, cut rough:-
    [​IMG]

    Then properly:-
    [​IMG]

    Then folded:-
    [​IMG]

    Join part 25 to part E:-
    [​IMG]

    Another view:-
    [​IMG]

    This now becomes part F,and completes the basic shape..

    Onto part 26, cut rough:-
    [​IMG]


    To be continued......
  8. CK Styles

    CK Styles Senior Member

    Joined:
    Jul 11, 2007
    Messages:
    438
    Likes Received:
    0
    Where did you get this model from. I cannot seem to find it out there. I would like to give it a go as well!
  9. imavingalaughaswell

    imavingalaughaswell Member

    Joined:
    Sep 3, 2006
    Messages:
    209
    Likes Received:
    0
    all available here:

    http://www.pwn3d.us/archives/1471/#more-1471

    it has been listed already in another thread..
  10. CK Styles

    CK Styles Senior Member

    Joined:
    Jul 11, 2007
    Messages:
    438
    Likes Received:
    0
    Thanks man. For whatever reason I could not locate that thread. I knew I had seen them somewhere. The next drink is on me!!!