Build thread:Canon EOS Kiss Digital

After my first attempt at a camera build,thread here http://forum.zealot.com/t159154/
Time for my second canon camera build..

Going to add a lot more photos this time to make it more interesting to look atsign1

Just printing the pages of now ready to start..

Forgot to add this..

I'm using what is labled as "250 gsm" card for the build..

not sure what the converts to?

To Be Continued
 
Update

OK here we go.

The Canon EOS Kiss Digital is available in two colors Black and Grey,I have chosen the Grey one because the print quality was better on my printer.

This time i have decided to take a lot more photos of the build..

First is part 1:- Cut out rough
JD500001.jpg


Then cut properly:-
JD500002.jpg


Before the next step i went around ALL the edges with a grey felt tip pen

Then folded:-
JD500003.jpg


I then went around any exposed edges after folding with the grey felt tip pen

On to part 2:- Cut out rough
JD500004.jpg


Then cut properly:-
JD500005.jpg


Before the next step i went around ALL the edges with a grey felt tip pen

Then folded:-
JD500006.jpg


Felt tip time again!

Join part 1 to part 2:-
JD500007.jpg


Again felt tip time
*NOTE* Parts 1 and 2 now become part A

One to part 3:- Cut out rough

JD500008.jpg


Then cut properly:-
JD500009.jpg


Again felt tip time.

To be continued.....
 
Update time

time for an update,As i said in first post ,lots of photos!!

Part 3 folded:-
JD500010.jpg


Felt tip time!

On to part 4,cut rough:-
JD500011.jpg


Then cut properly:-
JD500012.jpg


Felt tip time

Then folded:-
JD500013.jpg


Felt tip time

Join part 3 to part 4:-
JD500014.jpg


On to part 5,cut rough:-
JD500015.jpg


Then cut properly:-
JD500020.jpg


Then folded:-
JD500025.jpg


On to part 6,cut rough:-
JD500016.jpg


Then properly:-
JD500021.jpg


Then folded:-
JD500026.jpg


Join part 5 to part 6:-
JD500030.jpg


Onto part 7,cut rough:-
JD500017.jpg


Then properly:-
JD500022.jpg


Then folded:-
JD500027.jpg


Join parts 5/6 to part 7:-
JD500031.jpg


Onto part 8,cut rough:-
JD500018.jpg


Then properly:-
JD500023.jpg


Then folded:-
JD500028.jpg



To be continued...
 
Update time

Another update....

Join parts 5/6/7 to part 8:-
JD500032.jpg


On to part 9,cut rough:-
JD500019.jpg


then cut properly:-
JD500024.jpg


Then folded:-
JD500029.jpg


Join parts 5/6/7/8 to part 9:-
JD500033.jpg


Join parts 3/4 to parts 5/6/7/8/9:-
JD500034.jpg


This then becomes Part B

Onto part 10,cut rough:-
JD500035.jpg


Then properly:-
JD500044.jpg


Then folded:-
JD500053.jpg


Onto part 11,cut rough:-
JD500036.jpg


Then properly:-
JD500045.jpg


Then folded:-
JD500054.jpg


Join part 10 to part 11:-
JD500059.jpg


Onto part 12,cut rough:-
JD500037.jpg


Then properly:-
JD500046.jpg


Then folded:-
JD500055.jpg


Join parts 10/11 to part 12:-
JD500060.jpg


Onto part 13,cut rough:-
JD500038.jpg


Then properly:-
JD500047.jpg


Then folded:-
JD500056.jpg


Join parts 10/11/12 to part 13:-
JD500061.jpg


Onto part 14,cut rough:-
JD500039.jpg


Then properly:-
JD500048.jpg


Then folded:-
JD500057.jpg


Join parts 10/11/12/13 to part 14:-
JD500062.jpg


Onto part 15,cut rough:-
JD500040.jpg


Then properly:-
JD500049.jpg


Then folded:-
JD500058.jpg


Join parts 10/11/12/13/14 to part 15:-
JD500063.jpg


This becomes part C


To be continued....
 

CJTK1701

Banned
Sorry, I saw Kiss and thought you were going to build the Demon from KISS! sign1

You're building a paper camera? Looks good so far, very clean.:thumb:
 
Update time

Okies and so it continues.....

Onto part 16,cut rough:-
JD500041.jpg


Then properly:-
JD500050.jpg


Then folded:-
JD500064.jpg


Onto part 17, cut rough:-
JD500042.jpg


Then properly:-
JD500051.jpg


Then folded:-
JD500065.jpg


Join part 16 to part 17:-
JD500066.jpg


Onto part 18, cut rough:-
JD500043.jpg


Then properly:-
JD500052.jpg


Then folded(Has to be made to final shape in next step):-
JD500067.jpg


Join part 16/17 to part 18:-
JD500068.jpg


Onto part 19, cut rough:-
JD500069.jpg


Then properly:-
JD500075.jpg


Then folded:-
JD500081.jpg


Onto part 20, cut rough:-
JD500070.jpg


Then properly:-
JD500076.jpg


Then folded:-
JD500082.jpg


Onto part 21 (2 Needed), cut rough:-
JD500071.jpg


Then properly:-
JD500077.jpg


Then folded:-
JD500083.jpg


Onto part 22 (4 printed,but only 2 needed due to thicknes of card used),cut rough:-
JD500072.jpg


Then properly:-
JD500078.jpg


Join part 21 to 22 (do 2 times):-
JD500084.jpg


Onto part 23 (2 needed), cut rough:-
JD500073.jpg


Then properly:-
JD500079.jpg


Then folded (same as part 21):-
JD500083.jpg


Join parts 21/22 to part 23 (2 needed):-
JD500085.jpg


Onto part 24 (2 needed), cut rough:-
JD500074.jpg


Then properly:-
JD500080.jpg


Join part 24 to the bottom of parts 21/22/23:-
JD500085.jpg


*Note* there should now be 2 of the above assemblies.

Join part 21/22/23/24 to part 19:-
JD500086.jpg


Join parts 21/22/23/24 to part 20:-
JD500087.jpg


Join parts 19/21/22/23/24 to part B:-
JD500088.jpg


Join parts 20/21/22/23/24 to part C:-
JD500089.jpg


Join part B to part A:-
JD500090.jpg



To be continued......
 
Update time

Another update...

Join part D to parts A/C:-
JD500091.jpg


Another view:-
JD500092.jpg


Join Part B to parts A/C/D:-
JD500093.jpg


This now becomes part E

Onto part 25, cut rough:-
JD500094.jpg


Then properly:-
JD500095.jpg


Then folded:-
JD500096.jpg


Join part 25 to part E:-
JD500097.jpg


Another view:-
JD500098.jpg


This now becomes part F,and completes the basic shape..

Onto part 26, cut rough:-
JD500099.jpg



To be continued......
 

CK Styles

Senior Member
Where did you get this model from. I cannot seem to find it out there. I would like to give it a go as well!
 

CK Styles

Senior Member
Thanks man. For whatever reason I could not locate that thread. I knew I had seen them somewhere. The next drink is on me!!!
 
Top