Originally posted by Locobreath
Shamus:
As a new forum member I wanted to join the crowd in telling you your models and photography are nothing short of stunning.
I'm particularly interested in your lighting. I'd like to start taking some shots of my models so I can upload them to the site. What kind of lighting do you use for your photos?
Thanks lots.
Hello and welcome to the gauge.
Well I use FLUORESCENT DAYLIGHT TUBES, these tubes are rated at 55OO degrees Kelvin and are perfect match for colour photography, when using daylight type slide or print film. Also I might add that these are not what some people call "Cool Whites" as these are NOT daylight type tubes.
A little explanation on colour temperature verses colour prints, or for that matter colour slides. Light is measured in degrees Kelvin, and at around mid-day outside, is roughly 55OO degrees Kelvin. These tubes come in 4’ 5’ and 6’ lengths, and are only a little bit more expensive than normal household fluorescent tubes, and as they match daylight temperature, no filters i.e. 8OA or 8OB are required.
Unfortunately, Household fluorescent tubes cannot be used because they give a greenish cast to slide or colour prints. You can buy a filter for use using these tubes, but I wouldn’t recommend it.
Oh yes, I know that with a digital camera you can alter the "White Balance" if needed, but why not do it right the first time, and buy proper Daylight tubes. Philips TL'D 58Watt are what I use.
There is one point about the fluorescent tubes, and that is to keep them clean, as they collect dust, the colour temperature of 55OO degrees. Kelvin shifts a little, although you might not notice this, the camera will. I tend to clean mine just before a photo session, to make sure all will be well.
Shamus
