Here are the parts for the lowers wings.
The lowers wings are assembled.
The lower wings are attached in place.
The lowers wings are assembled.
The lower wings are attached in place.
"Happy Birthday Buck" Thunder Fighter (1:32 scale)
- Thread starter Rhaven Blaack
- Start date
Here are the parts for the rest of the underside and landing gear.
The underside components are assembled.
The components are attached in place.
The landing gear strut is assembled.
The landing gear strut is attached in place.
Please say tune to your local Earth Directorate broadcasting channels for more updates.
The underside components are assembled.
The components are attached in place.
The landing gear strut is assembled.
The landing gear strut is attached in place.
Please say tune to your local Earth Directorate broadcasting channels for more updates.
Here are the parts for both the vertical and horizontal stabilizers.
The vertical stabilizers are assembled.
The vertical stabilizers are attached in place.
The horizontal stabilizers are assembled.
The horizontal stabilizers are attached in place.
Please say tune to your local Earth Directorate broadcasting channels for more updates.
The vertical stabilizers are assembled.
The vertical stabilizers are attached in place.
The horizontal stabilizers are assembled.
The horizontal stabilizers are attached in place.
Please say tune to your local Earth Directorate broadcasting channels for more updates.
I found the manual of your phone. I thought I'd post it here to prevent another "mishap".
Moving on to the cockpit canopy. The main canopy pieces will be (loosely) sitting in place. That way, my friend can display it with the canopy open (so that you can see the cockpit interior) or closed.
Here are the parts for the cockpit canopy.
The rear (anchor) piece is assembled.
The rear (anchor) piece is attached in place.
The rear canopy piece is assembled.
The rear canopy piece is sitting in the "OPEN" position.
The rear canopy piece is sitting in the "CLOSED" position.
I attached the center (anchor) piece in place.
The rear canopy piece is put in place to check the placement of the center (anchor) piece.
The front canopy piece is assembled.
The front canopy piece. Both canopies in the "OPEN" position.
Both canopies in the "CLOSED" position.
Please say tune to your local Earth Directorate broadcasting channels for more updates.
Here are the parts for the cockpit canopy.
The rear (anchor) piece is assembled.
The rear (anchor) piece is attached in place.
The rear canopy piece is assembled.
The rear canopy piece is sitting in the "OPEN" position.
The rear canopy piece is sitting in the "CLOSED" position.
I attached the center (anchor) piece in place.
The rear canopy piece is put in place to check the placement of the center (anchor) piece.
The front canopy piece is assembled.
The front canopy piece. Both canopies in the "OPEN" position.
Both canopies in the "CLOSED" position.
Please say tune to your local Earth Directorate broadcasting channels for more updates.
This project is now finished.
Thank you for watching this thread!
Thank you for watching this thread!
An excellent result
how many multiples of the parts do you print to get your laminated appearance?
how many multiples of the parts do you print to get your laminated appearance?
