A tale of interrupts....
Hi,
Getting back into it, a little bit. Wow what a month or two. Two surgeries, got done, one planned for, the other for MRSA. And then C: drive fails, and then COVID 19 strikes.....
Well enough of the interrupts.
Now starting back up, working the wings. I have two sheets, that because of how they were coated, one on a cold day, and one on a normal day, that were two different colors! Same printer, same paper, just the spray was different. So... I had to laminate and cut another, that matched, but, wait, that is the same as the good one! Rats! I picked the same one to laminate and cut.... OK, now we do it again with the correct one! Such is the getting back into it again.
Found all the wing pieces. Check for symmetry, ie. both sides. Oops, different colors. See the big ones in the back of second picture.
OK, dig into the extras pages, found them, laminated them, and cut them out, now we looking are good.
Ahh, that's what those are, hardpoints, need to get them made. Scribe fold lines, cut, color edges, fold and glue....
OK, let's check to see if we have the correct wings? Ooops, the left is missing.
Alright now, we need to cut out and laminate the 'other' wing in the pile of extras....
And now we wait for the glue to do its thing. I used the little card on the right, in middle picture to spread the glue out. Seemed to work better than using my toothpicks. Brayer'd the layers and put them under weight.
Thanks, and hope you all are doing well.
Keep cutting and gluing and posting!
Scott ;-)