VF-1 Valkyrie
- Thread starter Getter1
- Start date
exelente tu trabajo una vez empese con una proyecto parecido pero no fue de tanta calidad no me atrebo a publicar las fotos por qe son horribles al lado de lo que armastes mis sinceras felicitaciones saludos julian
Excellent your work once I began with one similar project but it was not so many quality I do not dare to publish the photos because they are horrible next to what armastes my sincere congratulations regards julian
a los latinos o qe entiendan castellano me traducen qe no tengo idea del ingles solo use una traductor saludos
Excellent your work once I began with one similar project but it was not so many quality I do not dare to publish the photos because they are horrible next to what armastes my sincere congratulations regards julian
a los latinos o qe entiendan castellano me traducen qe no tengo idea del ingles solo use una traductor saludos
Hey Unikron,
Glad to see a build
Is that the Darkbird with Super Paks? What was your 1st build?
Juliansu27,
Show your build anyway
I wanna see more builds I put a lot of time into this so I wanna see even if you don't like it, I will
It's like seeing children or something
G1
Glad to see a build
Is that the Darkbird with Super Paks? What was your 1st build?Juliansu27,
Show your build anyway
I wanna see more builds I put a lot of time into this so I wanna see even if you don't like it, I will It's like seeing children or something
G1
Unikron,
Skull Leader with cockpit Now that's a beautiful thing
The canopy can be a pain but keep trying. You ony gotta make 1 sucessful mold and you got all A,J,&S variants covered
Keep it up. I wanna see more.
G1
Skull Leader with cockpit
Now that's a beautiful thing The canopy can be a pain but keep trying. You ony gotta make 1 sucessful mold and you got all A,J,&S variants covered
Keep it up. I wanna see more.
G1
muchas gracias por el trebajo que realizaron los felicito y tienen mis respetos ahora les muestro mis avances
muchas gracias por mirar y les mando un saludo desde mendoza argentina
thank you very much for looking and command them greetings from mendoza argentina
thank you very much for the work and I congratulate them now have my respect I show my progress
muchas gracias por mirar y les mando un saludo desde mendoza argentina
thank you very much for looking and command them greetings from mendoza argentina
I managed the Min may Guard gerwalk but It got crushed.Pool,
That's great I ask for build pics an woah, here they come!
Keep em comin folks
Unikron & Janx,
Battroid is not as scary as you think For one there's no cockpit Well unless.........Oh nevermind Don't ask
The Battroid's body is very easy to assemble. The hardest part is the nose and joints if you add em.
G1
That's great
I ask for build pics an woah, here they come! Keep em comin folks
Unikron & Janx,
Battroid is not as scary as you think
For one there's no cockpit Well unless.........Oh nevermind Don't ask The Battroid's body is very easy to assemble. The hardest part is the nose and joints if you add em.
G1
![P020609_17.13[01].jpg](/data/attachments/66/66841-da3fcb8b2a71d2dd365227291b359216.jpg?hash=2j_Liypx0t)
I'm having some issues with all of the VF models and I am sure that many North Americans will have the very same issues.
A4 Paper Size vs Letter Size.
Many pages are setup so that parts are quite close to the edge of the sheets leading to truncated parts. Some designers who put parts on A4 leave instructions, artist graphics and personal info to the outer edges. When you print to Letter Size the top and or bottom gets cut off which is OK as long as parts are not interfered with.
The solution to this problem is a bit easy. Moving large parts to the center of the sheet and smaller parts out from the center towards the edges. You can get the parts closer together and allow for more parts on a sheet, placing titles, credits and other information to the top and bottom.
I sooooooo want to build at least one of these puppies. :mrgreen:
A4 Paper Size vs Letter Size.
Many pages are setup so that parts are quite close to the edge of the sheets leading to truncated parts. Some designers who put parts on A4 leave instructions, artist graphics and personal info to the outer edges. When you print to Letter Size the top and or bottom gets cut off which is OK as long as parts are not interfered with.
The solution to this problem is a bit easy. Moving large parts to the center of the sheet and smaller parts out from the center towards the edges. You can get the parts closer together and allow for more parts on a sheet, placing titles, credits and other information to the top and bottom.
I sooooooo want to build at least one of these puppies. :mrgreen:
I am building my first VF1J at 50% size so I did not notice any border problem.
Now that I am starting the cockpit I am beginning to ponder the wisdom of that decision. hamr
So Janx, that is funny, I find these paper models a lot more fulfilling than WOW, though I was deeply addicted to it, but I leave behind a lvl 80 pally and lvl 70 mage, now I just want to build a fleet of these birds.
as long as people are requesting new arrangements, can we have the display stand on a separate page? It is rather atrocious on the black ink cartridge and I would rather make my own stands.
Now that I am starting the cockpit I am beginning to ponder the wisdom of that decision. hamr
So Janx, that is funny, I find these paper models a lot more fulfilling than WOW, though I was deeply addicted to it, but I leave behind a lvl 80 pally and lvl 70 mage, now I just want to build a fleet of these birds.
as long as people are requesting new arrangements, can we have the display stand on a separate page? It is rather atrocious on the black ink cartridge and I would rather make my own stands.
I'd have to agree about the paper size. Granted, printing at 92% gets pretty good results without too much compromise...
Over here we're running on A4 anyway, so I'm sound as a pound! sign1
jaeike, that looks very cool! How difficult was the canopy?
jaeike, that looks very cool! How difficult was the canopy?
