I'm not having any luck with the search tab finding the thread about how to make your own signs can someone help?
sign thread
- Thread starter belg
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
When I sand the back of the paper I lightly pass the sandpaper over the paper... otherwise you will rip or take too much off and your sign will have holes. I sand mine down until the print ink starts showing through the back side but is not totally exposed. I then take a SMALL drop of glue on a tooth pick and coat the back side very thin.. I let the glue set for a minute so it kina gels up a bit...
then I rub the decal on with the back side of my exacto knife or some other smooth object.
I use a medium grit sand paper... too fine clogs up... wears out too fast... to coarse and it will rip the back side if you are not careful.
Oh one more thing... I leave the decal on the sheet of paper while sanding it and I feather the sanded edges out beyond the edge of the sign. this makes it easier to sand small objects. I then cut it out with a very sharp exacto knife.
tada!!! instant el-cheapo sign
then I rub the decal on with the back side of my exacto knife or some other smooth object.
I use a medium grit sand paper... too fine clogs up... wears out too fast... to coarse and it will rip the back side if you are not careful.
Oh one more thing... I leave the decal on the sheet of paper while sanding it and I feather the sanded edges out beyond the edge of the sign. this makes it easier to sand small objects. I then cut it out with a very sharp exacto knife.
tada!!! instant el-cheapo sign
Guys this is not really the one I was looking for,it had more to do with the actual art links like gas and pepsi signs.
Not to say this ones not appreciated.Thanks
Not to say this ones not appreciated.Thanks