PT-91 Twardy 1:16 GPM

josve

Senior Member
Though I'm not a fun of modern tanks, this looks interesting!
Also there is some charm in those old hardcore drawings almost without isometric view.
Good luck in continuation of this project Johnny!
Thanks Igor! I can say for one thing certain...drawings are not the best ive seen :)
Model is the most complex I have tried to build...im not sure about the parts count, but its a huge amount of parts...
So im puzzeling along and enjoy the build :)
 

snake7

Well-Known Member
Is this a reprint of old model? Because on the front cover i see 2011, but the drawings look like those are taken from 80-90th :)
 

josve

Senior Member
Fall means building time :)
Easy start after the summer...made the holders for the log at the rear end.
And some part on the rear corners.
 

Attachments

  • tw1.jpg
    tw1.jpg
    155.2 KB · Views: 3
  • tw2.jpg
    tw2.jpg
    272.1 KB · Views: 2
  • tw3.jpg
    tw3.jpg
    290.8 KB · Views: 2
  • tw4.jpg
    tw4.jpg
    272.2 KB · Views: 3
  • tw5.jpg
    tw5.jpg
    156.4 KB · Views: 4
  • tw6.jpg
    tw6.jpg
    134.6 KB · Views: 2
  • tw7.jpg
    tw7.jpg
    258.3 KB · Views: 1

josve

Senior Member
Finished the fueltanks and the exhaust.
 

Attachments

  • tw18.jpg
    tw18.jpg
    285.1 KB · Views: 3
  • tw19.jpg
    tw19.jpg
    262.4 KB · Views: 4
  • tw20.jpg
    tw20.jpg
    287.1 KB · Views: 4
  • tw23.jpg
    tw23.jpg
    258.7 KB · Views: 4
  • tw26.jpg
    tw26.jpg
    259.4 KB · Views: 6
  • tw27.jpg
    tw27.jpg
    213.2 KB · Views: 6
  • tw28.jpg
    tw28.jpg
    231.3 KB · Views: 5
  • tw29.jpg
    tw29.jpg
    346.4 KB · Views: 4
  • tw30.jpg
    tw30.jpg
    320.4 KB · Views: 4
  • tw31.jpg
    tw31.jpg
    179.9 KB · Views: 5

josve

Senior Member
.Sooooo I started on the roadwheels.....

Cutted all parts out


The drawing shows a complex construction....


Also found a solution on making the hub covers


Years ago i bought something called a pukkelanke...its a goldsmiths tool for making half round shapes.


The result is a perfectly rounded shape :)


Next was the wheels...one wheel contains 42 parts....


Really a time consuming work...


Making those rim "cups"...oh my god...


All parts ready..


Cups done...nuts next


One weeks work....


4 wheels done...


As you van see i also have the next week occupied with making cups...


Stay tuned :)
 

josve

Senior Member
Thanks guys!!!

Did a brake in making roadwheels...very repetative work :)
So I decided tomake the drive wheels

A lot of parts are of course included in the drivewheels..


Here I have all parts included in then two wheels


Parts for one wheel is ready to be assembled


Really straight forward build.




Looks ok back there :)


Two down :)




Belt on :)


Moreto come :)
 

Rhaven Blaack

!!!THE MAN BEHIND THE CURTAIN!!!
Staff member
Administrator
Moderator
Your work always astounds me. when I see the finished components that you make, they look very realistic and do not look like they were made from paper.
 
Top