Here is were I will be posting all the freight trains I build and take pics of. Hope you guys enjoy this thread as much as I will. I am going to try some different things with the angles and haveing some traffic building up and passing as the trains go by. I also want to try and be shooting pics of a train while another freight train passes by.
My Freight Train Pics
- Thread starter TruckLover
- Start date
We will start off simple with a UP/CNW mixed goods freight train with just a simple black backround and no traffic passing. This is a LONG one, 41 pics!! Some of the rolling stock has been weathered and some hasnt yet. This train includes some of my new cars too like the BNSF gondola and the 2 BADX 62' tank cars.
Attachments
coolness! I only have one suggestion. The Athearn Sunshades suck. for a few dollars, you can by a set of 6 of them in brass from A-line, and adjust them for the right angle ( instead of sticking straight out).
these look a billion times better than those plastic ones. All you need is a pinvise, and a drill set that has atleast a #80 (which is the size of grab irons) and up, as well as some pliers, and the correct paint. I installed them on my GP-7, and i'm planning on putting them on some of my other locomotives as well.
Also, i think some of the parts are attached wrong ( looks like the CNW units were previously owned, lol.) might want to remove the head lights and sandfiller hatch, then re-install them from the inside like they are supposed to be. lol, it reminds me of my first kit, it was an AMD103, and i did the same thing!
these look a billion times better than those plastic ones. All you need is a pinvise, and a drill set that has atleast a #80 (which is the size of grab irons) and up, as well as some pliers, and the correct paint. I installed them on my GP-7, and i'm planning on putting them on some of my other locomotives as well.
Also, i think some of the parts are attached wrong ( looks like the CNW units were previously owned, lol.) might want to remove the head lights and sandfiller hatch, then re-install them from the inside like they are supposed to be. lol, it reminds me of my first kit, it was an AMD103, and i did the same thing!
green_elite_cab said:
Ya, those Athearn shades do look a little cheazy sign1 Thanks for the suggestion. I will be sure to get em in my next order from A-LINE
green_elite_cab said:
ops: ops:65GASSER said:
sign1 $15.00 off ebay and I almost won 2 more for the same price,
got outbid the last 5 sec by $.03 :curse: :curse: :curse: :curse: :curse: :curse: :curse: sign1
there's some NICE pics in there Josh!:thumb:
as far as the sunshades go, you've seen enough pics of my engines, most of the sunshades on mine are home made from styrene, couldn't tell could ya
. sure brass sunshades are nice, but its cheaper to make your own, just a thought. i don't have any dummy engines, but if i did, i would put the sunshades on some of them in the "fully down" position, check out pics of REAL engines following the engine on point, you see that a lot.
looking forward to more pics!:thumb:
-Deano
as far as the sunshades go, you've seen enough pics of my engines, most of the sunshades on mine are home made from styrene, couldn't tell could ya
. sure brass sunshades are nice, but its cheaper to make your own, just a thought. i don't have any dummy engines, but if i did, i would put the sunshades on some of them in the "fully down" position, check out pics of REAL engines following the engine on point, you see that a lot. looking forward to more pics!:thumb:
-DeanoThanks Deano. Im going to find some proto pics right now and I will think about scratch building them too. Sounds simple enough.
O and no, I couldn't tell about the sun shades, but now I know.sign1
O and no, I couldn't tell about the sun shades, but now I know.sign1
TruckLover said:sign1 $15.00 off ebay and I almost won 2 more for the same price,
got outbid the last 5 sec by $.03 :curse: :curse: :curse: :curse: :curse: :curse: :curse: sign1
I just picked up 7 40" GATX tanks, 2 65" UTLX and 2 65" GATX tanks off ebay! Man I have a sickness. Anyway I'm pretty envious of your setup there! :thumb: