MU Hoses
To all,
Each locomotive should have three hoses on each corner, (or 6 plus 1 on each end) and one Brake pipe hose and valve just to the right of the couple on each end. The hoses are designated as follows; looking at the pilot, to the left is 'Brake Cylinder', 'Actuate' {a bail}, 'Main Reservoir'. Then the Brake Pipe in the middle, then another Main Res, then another Act. and then a Brake Cylinder on the right. The brake pipe is 1 1/4" hose, the two main res hoses are 1", and the other four are all 1/2".
Hope this helps,
Drew