AT-TE and LAAT-C 1/250th scale by Dmitriy Dobranovskiy

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
The back turrets are done, 2 topside on angled housings, which you have to edge glue to form, or use strips added inside, and two round bubble turrets on the underside.
20200912_175606_resized.jpg20200912_175616_resized.jpg20200912_175629_resized.jpg
next are the legs and feet... more small cones to make, ohh joy.
 

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
Sometimes really small models, well, they look like crap, people use too heavy or thick paper. Your model looks great!! Nice and symmetric. :)
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
Only paper I have is 20# copy paper, and some 67# sheet stock. This model was printed on the 67# stock. so far, no problems caused by paper thickness.
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
The plans include a small section in the top right of page one, called "additional parts" knuckles for the legs, armor plates, and gun faces, so they intended some greebeling.
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
So far I have added the 4 small armor plates to the belly section, and the large two knuckles to the large center legs. I'll get the rest added tomorrow.
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
I added the extra pieces to the legs and front turrets of the All Terrain Tactical Enforcer. I don't know if they can even be seen in these pictures.
20200915_161049_resized.jpg20200915_161101_resized.jpg20200915_161110_resized.jpg20200915_161119_resized.jpg20200915_161127_resized.jpg20200915_161139_resized.jpg20200915_161144_resized.jpg20200915_161152_resized.jpg

I'll try playing around with the camera settings of my new Note 20 Ultra, it's supposed to have some truly great camera capabilities. But I'm a Noob when it comes to camera stuff.
 

Revell-Fan

Co-Administrator
Staff member
Administrator
Moderator
Hah, you might be laughing. However, I guarantee, if the Trade Federation had had some of THESE

1600268190803.png

the Clone Wars surely would have ended differently..!

:Grin:
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
I have enough bugs in my house, the wifes Gecko's eat live bugs, so she keeps Dubia roaches, mealworms, and superworms...
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
Nothing like going to the pet supply store, that your pest control guy recommends, and asking for 100 Dubia roaches, 60 mealworms, and 30 superworms, to feed 5 leopard geckos for a month...
But I got started on the LAAT-C, pieces 1,2,3A and B, Right and Left. 6 pieces so far to get to the last pic...
20200916_124746_resized.jpg20200916_125137_resized.jpg20200916_125140_resized.jpg20200916_125143_resized.jpg20200916_130513_resized.jpg20200916_130519_resized.jpg20200916_130527_resized.jpg20200916_132523_resized.jpg20200916_133726_resized.jpg

the "instructions" are just 4 line drawings with piece number call outs, but no exploded views, so I am just guessing how to fold these.
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
I got the lower side pieces added, had a minor accident while waiting for glue to dry on the wing lamination, was mixing base sealer for D&D dungeon tiles, and had some of the sealer spill, luckily none got on this model or the parts sheet.
20200916_165742_resized.jpg20200916_165750_resized.jpg20200916_165756_resized.jpg20200916_165802_resized.jpg20200916_165812_resized.jpg20200916_165818_resized.jpg20200916_172213_resized.jpg
It turns out, that most of the assembly follows part numbers, but still, ya gotta figure out how to fold things yourself. I found no "fold lines" per say on the sheets, and I extrapolated the fold lines, from the tab locations, missed once so far...

Since the D&D dungeon tiles are just foam-core and foam stock, I'll start a different thread for them under "other materials"
 

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
I added the extra pieces to the legs and front turrets of the All Terrain Tactical Enforcer. I don't know if they can even be seen in these pictures.
View attachment 188010View attachment 188011View attachment 188012View attachment 188013View attachment 188014View attachment 188015View attachment 188016View attachment 188017

I'll try playing around with the camera settings of my new Note 20 Ultra, it's supposed to have some truly great camera capabilities. But I'm a Noob when it comes to camera stuff.


This model came out great.. If you add in how small it is, it's almost unbelievable. I am very impressed (not that my impression means anything means anything) but I am. I have Bratwurst fingers. That model would get lost under my fingernail!! :)
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
Thanks John, I have sausage fingers, ring size 13 1/2, but I have small tweezers :cool:
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
everything is done, except the mating of the AT-TE to the belly of the LAAT-C. If I had some tiny magnets, I could have made the two separable. Alas I will have to glue them together. last pic shows how they sit now, "clamps" glued to the 'shoulders' of the AT-TE, and 'arms' ready to be assembled around them.

20200918_095927_resized.jpg20200918_095933_resized.jpg20200918_095938_resized.jpg20200918_095944_resized.jpg

20200918_142009_resized.jpg

I truly suck at making small cone shaped pieces, small cylinders, I can roll around a dowel, but cones??? Ohh well.
 
Top