Wings!
Once again I form the leading edges around the edge of my clipboard. Then I round out the tops of the wingsand glue at the trailing edges
After the trailing edges are dry, I curl the wing in my fists to form the undercamber to the bottoms of the wings. Look at the shape that on the sides of the fuselage to see what the ultimate shape of the wings need to be.
I form the wing center section the same way as the wings.
When gluing the wings together, first I glue only the lower glue tabs of the wing center section to the wings. Before this glue is dry I make sure that the leading edge of the whole length of the wing is straight. With the lower glue tabs dry, I bend the wings downward so I can get glue under the upper wing roots.