Jan Rukr's Astro-Racers (an independent's entry!)

Jan has sent me a emblem which should be mounted on the aircraft. There has to be some kind of vetting procedure. A clear build thread would be a 99% guarantee. Also, I think the ship should be assigned a number, like in real racing, that stays with it. The number has no significance, other than a way to keep tabs on it. I need feedback. I won't post the pics yet as I do not want anyone usurping this who does not belong to ZEALOT. This is our thing. All you have to do is join this forum to get into it.

SO, please, help me with some ideas on vetting (Judging whether the model is in the spirit, and since just about anything goes, that shouldn't be hard. Any ideas, put them in this thread. I really need your input on this.
 
Jan has sent me a emblem which should be mounted on the aircraft. There has to be some kind of vetting procedure. A clear build thread would be a 99% guarantee. Also, I think the ship should be assigned a number, like in real racing, that stays with it. The number has no significance, other than a way to keep tabs on it. I need feedback. I won't post the pics yet as I do not want anyone usurping this who does not belong to ZEALOT. This is our thing. All you have to do is join this forum to get into it.

SO, please, help me with some ideas on vetting (Judging whether the model is in the spirit, and since just about anything goes, that shouldn't be hard. Any ideas, put them in this thread. I really need your input on this.

1. Model in the spirit - If the plane / ship / racer can be imagined in a race course setting like a standard racetrack only flying (see wipeout for reference). No Vorlon planet destroyers. Has to convey a sense of speed.

2. Numerology - Just have to make sure and keep track of a list of craft - like on Jan website now & maybe (if the model is good enough) put on Jan's site. Maybe possible vote on models and if accepted assign a number to said model.

3. Adjustability of the Astro Racer logo on the model - Can make it big or small. If on the main top portion of the racer make it small. If on the bottom have it a large as you want.

4. Artist's Name on the bottom - with suitable logo. Hmmm.. Have the Astro racer logo in the center with the artist's name below (centered).

5. Stock entrees, special entrees, and just wacked out entrees (See St. Dragon on Jan's site for details).

That's all I have for now.

Sky Seeker
 
The models will stay on this site. I can't get into that, proprietary reasons, also in Jan's interest. It would cost him more money to host them.
 
Jan Rukr has sent me some final requirements for out own creations of "Independent Astro Racers entries/creations"

If you have an opinion, or idea, POST IT NOW!! :)
 
Jan Rukr has sent me some final requirements for out own creations of "Independent Astro Racers entries/creations"

If you have an opinion, or idea, POST IT NOW!! :)

Z - Ok, but when can we see the requirements to comment one way or the other?

Sky Seeker
 
Soon, like now ( won't post the logo till we get the system up for doing this, I don't want someone from any other forum sidling their way into something they do not have permission to. also, in the "logo" you see, ZEALOT will have to appear. This is again so that Jan knows it came from here. You build a model, you have thrown it to the wind. Of course, you build something and paing it some others colors, you can do whatever you wish with it, you just can't call it an Astro Racer. This is all pending as we are still going back and fourth.

Medallion:


custom ship - logo (possible use).png Your Avatar Name, and smaller, under neat "zealot" go in the "By your creations Banner", everything is being done that I am able to think of to protect Jan's Astro-Racer design concept . That is imperative.




FOR THE BULDERS:


Astro Racer staff:

The craft must have a racing number between 1 and 1000 followed by AR letters or there must be at least one ASTRO RACERS sign somewhere at the visible surface (hood).

The craft with the emergendy escape vehicle system have this sign eev-system.png (optional stuff - you don´t need to have some rescue vehicle for your pilot:D)

No weapons allowed.

Craft can be equipped with antigravity device branded by DUNAHILL (sign of the dunahill - dunahill.png - can be placed on craft)

The craft must fit in the box 20x20x20 meters (starting box dimensions)

Engine technology and shape of the craft is optional

__________________________________

Papermodel is 1~2 pages of A4 format. Relatively easy construction with 30 marked parts at maximum. (Optimum is one paper sheet with 17 parts).

One of the dimensions (h x l x w) of the papermodel is 15~17cm...(optimal case). There is no need small, high detailed model with plenty of parts.

It is better to make a model with landing gear down.(open)

it is good to have some background story + some graphic medallion.

One easy graphic building plan and that´s it. Astroracer is finished :)
 
Soon, like now ( won't post the logo till we get the system up for doing this, I don't want someone from any other forum sidling their way into something they do not have permission to. also, in the "logo" you see, ZEALOT will have to appear. This is again so that Jan knows it came from here. You build a model, you have thrown it to the wind. Of course, you build something and paing it some others colors, you can do whatever you wish with it, you just can't call it an Astro Racer. This is all pending as we are still going back and fourth.

Medallion:


View attachment 147711 Your Avatar Name, and smaller, under neat "zealot" go in the "By your creations Banner", everything is being done that I am able to think of to protect Jan's Astro-Racer design concept . That is imperative.


FOR THE BULDERS:


Astro Racer staff:

The craft must have a racing number between 1 and 1000 followed by AR letters or there must be at least one ASTRO RACERS sign somewhere at the visible surface (hood).

The craft with the emergendy escape vehicle system have this sign eev-system.png (optional stuff - you don´t need to have some rescue vehicle for your pilot:D)

No weapons allowed.

Craft can be equipped with antigravity device branded by DUNAHILL (sign of the dunahill - dunahill.png - can be placed on craft)

The craft must fit in the box 20x20x20 meters (starting box dimensions)

Engine technology and shape of the craft is optional

__________________________________

Papermodel is 1~2 pages of A4 format. Relatively easy construction with 30 marked parts at maximum. (Optimum is one paper sheet with 17 parts).

One of the dimensions (h x l x w) of the papermodel is 15~17cm...(optimal case). There is no need small, high detailed model with plenty of parts.

It is better to make a model with landing gear down.(open)

it is good to have some background story + some graphic medallion.

One easy graphic building plan and that´s it. Astroracer is finished :)

Z - Looks great. One change I would make is that those of US in the states use 8.5X11 in lieu of the A4 european standard. Would that be acceptable?

Sky Seeker
 
Yes, and these are among the things Jan and myself are finalized. Paper size is up to the individual, as is model scale size. The "true size" maximum is 20 x 20 x 20 meters. Obviously, that is for reference. :)
 
  • Like
Reactions: Sky Seeker
Yes, and these are among the things Jan and myself are finalized. Paper size is up to the individual, as is model scale size. The "true size" maximum is 20 x 20 x 20 meters. Obviously, that is for reference. :)

Z - Be Careful there! I know a guy that can supply a banner that size. I'd have to seriously laminate the paper and reinforce it copiously. Hmmm... this might go into the realm of fiberglas. Just thinking out loud, but it could be done.

Sky Seeker
 
  • Like
Reactions: DanBKing
My brother-in-law's brother is a printer and can make huge banners also. :)
 
What ?????? Bruce Banner is your brother-in-law ????
That is Hulking it a bit, isn't it ????? :D

now that's funny.

seriously though this is a great idea i am so doing some of these i have several ideas already. my only problem is i cant create textures i can do 3D just fine but when it comes to the 2D apps.... so anyone interested in teaming up?
 
  • Like
Reactions: DanBKing
You can add textures in Paint. Making a "Independent" entry model means that having something maybe not so polished, adds to the realism. :)
 
What ?????? Bruce Banner is your brother-in-law ????
That is Hulking it a bit, isn't it ????? :D


Yeah, that is funny, only thing is his Bruces are really wide, but extremely thin! :)
 
  • Like
Reactions: Sky Seeker