The new template is ready and I printed the pages for one wing side to check the fitting.
I cut the first wing and add a new back side to it. Then I laminated it with some pieces of cardboard I also left some space for the optic fibres.
![20240309_174310.jpg 20240309_174310.jpg](https://www.zealot.com/data/attachments/197/197273-d20323777f8ba975c460cf41c9386656.jpg)
![20240309_174404.jpg 20240309_174404.jpg](https://www.zealot.com/data/attachments/197/197274-c71a4d36c7768a325ee8e554fcd3926f.jpg)
![20240309_174424.jpg 20240309_174424.jpg](https://www.zealot.com/data/attachments/197/197275-2f0dc91e65d3466698068e56d7275a68.jpg)
Next I cut the internal formers also glued on cardboard.
![20240309_174340.jpg 20240309_174340.jpg](https://www.zealot.com/data/attachments/197/197276-f0c746c22f39f9ca5b54962b08db2b00.jpg)
![20240309_174445.jpg 20240309_174445.jpg](https://www.zealot.com/data/attachments/197/197277-483c091587dac27c774cb5f6f8bc4242.jpg)
![20240309_174500.jpg 20240309_174500.jpg](https://www.zealot.com/data/attachments/197/197278-2b861648705bab23e2be61daff4b33f9.jpg)
Next I will glue the formers and I hope the wing is straight.
I cut the first wing and add a new back side to it. Then I laminated it with some pieces of cardboard I also left some space for the optic fibres.
![20240309_174310.jpg 20240309_174310.jpg](https://www.zealot.com/data/attachments/197/197273-d20323777f8ba975c460cf41c9386656.jpg)
![20240309_174404.jpg 20240309_174404.jpg](https://www.zealot.com/data/attachments/197/197274-c71a4d36c7768a325ee8e554fcd3926f.jpg)
![20240309_174424.jpg 20240309_174424.jpg](https://www.zealot.com/data/attachments/197/197275-2f0dc91e65d3466698068e56d7275a68.jpg)
Next I cut the internal formers also glued on cardboard.
![20240309_174340.jpg 20240309_174340.jpg](https://www.zealot.com/data/attachments/197/197276-f0c746c22f39f9ca5b54962b08db2b00.jpg)
![20240309_174445.jpg 20240309_174445.jpg](https://www.zealot.com/data/attachments/197/197277-483c091587dac27c774cb5f6f8bc4242.jpg)
![20240309_174500.jpg 20240309_174500.jpg](https://www.zealot.com/data/attachments/197/197278-2b861648705bab23e2be61daff4b33f9.jpg)
Next I will glue the formers and I hope the wing is straight.