Thank you! ![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
The small blue light is supposed to be attached to a block.
![DSCF7183.jpg DSCF7183.jpg](https://www.zealot.com/data/attachments/164/164325-6a6b8f014a873dd3784691b093b1a778.jpg)
It is not possible to glue the block to the vehicle unless you skip the block with the orange lights. On the real engine the blue light sits on a flat red square with another white light below. That red square is located directly above the block with the orange lights. So I cut out a 1x1cm red square from one of the misprints and laminated it to 1mm card.
![DSCF7184.jpg DSCF7184.jpg](https://www.zealot.com/data/attachments/164/164326-d8511b5258e8b602e86a7ef744863418.jpg)
This was laminated to some leftover white paper and painted black.
![DSCF7186.jpg DSCF7186.jpg](https://www.zealot.com/data/attachments/164/164327-7a76dae1c75ae53e06baf340f8206d84.jpg)
A smaller rectangle cut from white paper was glued on top of the black side.
![DSCF7187.jpg DSCF7187.jpg](https://www.zealot.com/data/attachments/164/164328-652e57dadf64d9d67ee0502edf73d794.jpg)
The light was glued to the red side.
![DSCF7188.jpg DSCF7188.jpg](https://www.zealot.com/data/attachments/164/164329-720cf32d960c5ed5fd75146ac210a42d.jpg)
Then the plate was mounted on top of the block at the rear of the vehicle:
![DSCF7189.jpg DSCF7189.jpg](https://www.zealot.com/data/attachments/164/164330-ed4aceb3b9c2de08bc2cf49d06b47821.jpg)
![DSCF7191.jpg DSCF7191.jpg](https://www.zealot.com/data/attachments/164/164331-5bd24834ee5aa5e7be3a0e11837e49c1.jpg)
The side mirrors needed to shine. I cut the parts out and laminated the black half to some reflective card from a chocolate box.
![DSCF7177.jpg DSCF7177.jpg](https://www.zealot.com/data/attachments/164/164320-0b49d306cbd448d014aed61586dc4466.jpg)
![DSCF7178.jpg DSCF7178.jpg](https://www.zealot.com/data/attachments/164/164321-cdf81f60d17e6a6a240265aece168cc2.jpg)
![DSCF7179.jpg DSCF7179.jpg](https://www.zealot.com/data/attachments/164/164322-aad69380f28dabfd5f38dadbb3590f8b.jpg)
I cut off the black handles from the kit parts and laminated them to the reflective side of the mirrors.
![DSCF7181.jpg DSCF7181.jpg](https://www.zealot.com/data/attachments/164/164323-1491fc21acd43bc5b5fcee7c8b1ec007.jpg)
![DSCF7182.jpg DSCF7182.jpg](https://www.zealot.com/data/attachments/164/164324-c0e477c329d7b095684dbdd2422a3d25.jpg)
The drawn mirrors were discarded.
When I was looking at the finished pieces I noticed that they were identical! Volker forgot to mirror the mirror parts. To fix this I cut off a small amount of the handles of both pieces.
The unused part for the small blue light box was recycled to make two top side mirrors:
![DSCF7192.JPG DSCF7192.JPG](https://www.zealot.com/data/attachments/164/164332-48f24658ba88fbf21c518c7e9fd4a45e.jpg)
![DSCF7193.JPG DSCF7193.JPG](https://www.zealot.com/data/attachments/164/164333-d9612aacfe1021922e04a5450b02d39a.jpg)
Volker's kit does not include these but they are present on the real vehicle.
The small blue light is supposed to be attached to a block.
![DSCF7183.jpg DSCF7183.jpg](https://www.zealot.com/data/attachments/164/164325-6a6b8f014a873dd3784691b093b1a778.jpg)
It is not possible to glue the block to the vehicle unless you skip the block with the orange lights. On the real engine the blue light sits on a flat red square with another white light below. That red square is located directly above the block with the orange lights. So I cut out a 1x1cm red square from one of the misprints and laminated it to 1mm card.
![DSCF7184.jpg DSCF7184.jpg](https://www.zealot.com/data/attachments/164/164326-d8511b5258e8b602e86a7ef744863418.jpg)
This was laminated to some leftover white paper and painted black.
![DSCF7186.jpg DSCF7186.jpg](https://www.zealot.com/data/attachments/164/164327-7a76dae1c75ae53e06baf340f8206d84.jpg)
A smaller rectangle cut from white paper was glued on top of the black side.
![DSCF7187.jpg DSCF7187.jpg](https://www.zealot.com/data/attachments/164/164328-652e57dadf64d9d67ee0502edf73d794.jpg)
The light was glued to the red side.
![DSCF7188.jpg DSCF7188.jpg](https://www.zealot.com/data/attachments/164/164329-720cf32d960c5ed5fd75146ac210a42d.jpg)
Then the plate was mounted on top of the block at the rear of the vehicle:
![DSCF7189.jpg DSCF7189.jpg](https://www.zealot.com/data/attachments/164/164330-ed4aceb3b9c2de08bc2cf49d06b47821.jpg)
![DSCF7191.jpg DSCF7191.jpg](https://www.zealot.com/data/attachments/164/164331-5bd24834ee5aa5e7be3a0e11837e49c1.jpg)
The side mirrors needed to shine. I cut the parts out and laminated the black half to some reflective card from a chocolate box.
![DSCF7177.jpg DSCF7177.jpg](https://www.zealot.com/data/attachments/164/164320-0b49d306cbd448d014aed61586dc4466.jpg)
![DSCF7178.jpg DSCF7178.jpg](https://www.zealot.com/data/attachments/164/164321-cdf81f60d17e6a6a240265aece168cc2.jpg)
![DSCF7179.jpg DSCF7179.jpg](https://www.zealot.com/data/attachments/164/164322-aad69380f28dabfd5f38dadbb3590f8b.jpg)
I cut off the black handles from the kit parts and laminated them to the reflective side of the mirrors.
![DSCF7181.jpg DSCF7181.jpg](https://www.zealot.com/data/attachments/164/164323-1491fc21acd43bc5b5fcee7c8b1ec007.jpg)
![DSCF7182.jpg DSCF7182.jpg](https://www.zealot.com/data/attachments/164/164324-c0e477c329d7b095684dbdd2422a3d25.jpg)
The drawn mirrors were discarded.
When I was looking at the finished pieces I noticed that they were identical! Volker forgot to mirror the mirror parts. To fix this I cut off a small amount of the handles of both pieces.
The unused part for the small blue light box was recycled to make two top side mirrors:
![DSCF7192.JPG DSCF7192.JPG](https://www.zealot.com/data/attachments/164/164332-48f24658ba88fbf21c518c7e9fd4a45e.jpg)
![DSCF7193.JPG DSCF7193.JPG](https://www.zealot.com/data/attachments/164/164333-d9612aacfe1021922e04a5450b02d39a.jpg)
Volker's kit does not include these but they are present on the real vehicle.