Pzkpfw. I Ausf. A, Orlik, 1:25

snake7

Well-Known Member
Thanks guys!

Next are steering brake levers

IsumZ3.png


jJc9fR.jpg


The rod itself I made from office fastener

Df3nFE.jpg


rpGOjY.jpg


6soNCm.jpg


7oLtGC.jpg


Bugs:
detail 183 must be marked as count 2 and not one
 
Last edited:

snake7

Well-Known Member
Front plate with all the stuff: instrument panel, radio set and couple of shelfs

K5m65C.png

jI5Zuu.png


DLrAqm.jpg


For gauges glass imitation i used some thin plastic from old package

ctFXCv.jpg


W0vh8C.jpg


Assembled all together

iBjWbG.jpg


UOXBZi.jpg


Glued in place

VxlB5l.jpg


TytDGV.jpg


Errors:
Gluing mark on detail 191 for detail 195 (radio set rack) must be full white and not frame. It confuses which side of rack to stick
 

snake7

Well-Known Member
It's time for hull's upper part
Starting from a frame
This one has a lot of angled sides, so designer gave support structure to glue all sides with right angles

On the left is the support structure, on the right is the hull part

O2uYY4.png


Most of the parts must be cut with angled edges

iimnA0.jpg


UOfBBN.jpg


7iFPmL.jpg


In a matter of fact, it's really helped, and I connected all sides with ease

180niu.jpg


Also tried dry fit upper plate

itsncG.jpg


Last part glued without support structure and frame of upper hull is ready

v3LgyY.jpg


FYbIZj.jpg


q8NPUX.jpg


Errors:
there are some mistakes with left /right sides on parts K11, K13 and K15. So, you need to pay attention when assembling all together
 

snake7

Well-Known Member
Continue with visors mechanisms
Three of a kind

iOtBDX.png


YTbBLL.jpg


The front visor was a tricky one, but i doubt that i will play with those, though they are working and can be open

E82ifU.jpg


QXBaa0.jpg


YcuFv8.jpg


lK30Mc.jpg


dhOyRg.jpg


Errors:
Part 210 must be glued on 0.5 cardboard, but asterisk is missing.
Assembled part 226 does not fit correctly with part 219 - openings for visor position to wide
 

mijob

Tie designer
Staff member
Moderator
Holly smokes these visors are so looking good. You are doing a great job all so crisp and clear I'm blown away. :bowdown:
 

snake7

Well-Known Member
Thanks friends

My patience for repeated small parts is not what it used to be.
So, in couple with holidays and pressure at work it took some time until i finished those machine gun magazines. Did it bit by bit here and there.
In addition made shelfs for those, rotation gear strip and two gas masks

eSvCf3.png


Magazines

cnTWm6.jpg


KVCZ9t.jpg


Shelfs

baiGwm.jpg


4bIIoK.jpg


Gas masks and their mounting strips

vxXnd0.jpg


lXRmUL.jpg


Placed everything inside and filled up shelfs
Final touch was to close with upper plate. I thought to leave it open to see the inside, but noticed that even with it attached you can see almost everything inside the hull

FDdxK0.jpg


51VzIm.jpg


5ffkKv.jpg


8fbquo.jpg


Errors:

None
 
Top