MiG-15 Bis Fagot

artekd

New Member
Hi, let me introduce 1/33 scale model of MiG
 

Attachments

  • IMG_4765m.jpg
    IMG_4765m.jpg
    2.7 MB · Views: 12
  • IMG_4770m.jpg
    IMG_4770m.jpg
    2.8 MB · Views: 15
  • IMG_4771m.jpg
    IMG_4771m.jpg
    3.6 MB · Views: 14
  • IMG_4774m.jpg
    IMG_4774m.jpg
    3.2 MB · Views: 14
  • IMG_4776m.jpg
    IMG_4776m.jpg
    2.8 MB · Views: 12
  • IMG_4777m.jpg
    IMG_4777m.jpg
    2.4 MB · Views: 12
  • IMG_4781m.jpg
    IMG_4781m.jpg
    3.2 MB · Views: 14
  • IMG_4788m.jpg
    IMG_4788m.jpg
    1.6 MB · Views: 11
  • IMG_4790m.jpg
    IMG_4790m.jpg
    3.4 MB · Views: 12
  • IMG_4805m.jpg
    IMG_4805m.jpg
    3.7 MB · Views: 11
  • IMG_4802m.jpg
    IMG_4802m.jpg
    3.4 MB · Views: 13
  • IMG_4815m.jpg
    IMG_4815m.jpg
    3.5 MB · Views: 13
  • IMG_4818m.jpg
    IMG_4818m.jpg
    2.6 MB · Views: 9

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
Very well made. I am impressed how you put the Cockpit Glass framing on the inside and outside. The landing fear, inside surfaces of flaps, the air brake Hydraulic actuators, extreme detail. The intake, and the extremely blended surfaces, and detail make this a top tier model. An exceptional build. Welcome to Zealot, we look forward to more pics and build threads. Maybe you can share your technique with us? :)
 

artekd

New Member
Thank you all. This is the model of the Hobby Model publishing. It's a bit difficult. Before cutting out all the sheets I covered with clear varnish. The cab frame is glued using double-sided tape. No glue. Small holes in aerodynamic brakes under the wings were made by a biopsy punch. The wheels are from resin. Retouch is made with Promarker type pens. The figurine of the Soviet pilot and mechanics are from www.paulestudios.com and are also made of paper. All sheets were covered
 
Last edited:
Top