This is my build of the Klingon Scout Ship by Conrad Mitchell. I scaled it down to 30% to fit with my Rawen-sized starships. I got to that by imposing the scout over a Rawen file and scaling down until the windows were the same height. At that size, I skipped using the internal bracing, so this isn't a complete build of this model but it covers all the basics.
Main hull assembles as a basic score, cut, fold and glue. However, when I went to attach the bottom of the hull it didn't match up with the top and was too small. I didn't want to start over, so I cut the ends of the wing sections off at the fold, trimmed the excess off the hull, glued the wing end tops and bottoms, and glued the wing ends back to the hull at an angle.
Main hull assembles as a basic score, cut, fold and glue. However, when I went to attach the bottom of the hull it didn't match up with the top and was too small. I didn't want to start over, so I cut the ends of the wing sections off at the fold, trimmed the excess off the hull, glued the wing end tops and bottoms, and glued the wing ends back to the hull at an angle.