Ex S Gundam Build

[Bolo515LNE]

with the Mk V model that's out there, there's getting to be a respectable Sentinel lineup. I just hope a FAZZ-A or Z+C1 is in works

 

[Bolo515LNE]

with the Mk V model that's out there, there's getting to be a respectable Sentinel lineup. I just hope a FAZZ-A or Z+C1 is in works

 

[alteisen]

can you send file EX-S to me ?
if u can please send to sehyde@gmail.com
Thx.

 

[rlc321]

to continue

hi guys sorry its been so long been very busy starting my own pc repair and web design business. but any way here we go.
here is the front part of the chest

 

[rlc321]

chest

and here is where it goes.

 

[rlc321]

tricky

this little piece is quite tricky it actually consists of three pieces and if you glue the tabs to show no lines your are in trouble leave a little gap and clor the joins.. just a suggestion.

 

[rlc321]

done

once done it goes here

 

[Mark_1984]

This is a great build thread - it's going to be an impressive model when it's finished.

 

[rlc321]

bottom half of chest

ok this piece is staright forward and easy here are two pics befor and after glue

 

[rlc321]

goes here

make sure you get it dead in the centre for the following pieces to fit nicley.
and it should look like this

 

[rlc321]

right side bottom half chest

this is the same for the left and right side all four pics show unglued and glued.

 

[rlc321]

end result

and wher they go on the main model

 

[rlc321]

next

ok the next set of pics are really dark but you can make out what they are and where they go. again sorry for being dark the sun was starting to go down and if i used the flash at that close range all i would get is white nothing.

 

[rlc321]

ok next up is a small piece

again sorry for photo.

 

[rlc321]

and that

little pice goes here. well that will be all for now i will post more better qaulity pics as i go its taking awhile as i have to stop to take em but i hope it will be help to someone out there..

 

[Lex]

Nice to see you are finally back on track ^_^ Keep up the good work!

 

[daredevilbr]

pictures of a friend's model that this finishing.... that is the link of his blog... (http://www.firepaper.blogspot.com/).... him ta developing "GAT-X105 Aile Strike Gundam" (Gundam Seed)... him this finishing modeling... in the blog of the for you to see the progress of the project

rlc321 then I answer her email ok!!

 

[rlc321]

foot build

ok here i am again with some more build pics so we are gonna start with a foot you will have to print the foot and maybe leg pages twice, any way here is the first pic and the second is what it looks like glued this will be how i do the pictures from now on as its easier and quicker for me to build...

 

[rlc321]

instep

and now for the instep....

 

[rlc321]

instep continued

and this little piece goes here....