Search results

  1. W

    Paw Patrol Chase

    thank you, guys.
  2. W

    Paw Patrol Chase

    And here he is in all his glory, together with Marshall /Wilhelm
  3. W

    Paw Patrol Chase

    Here is a new father-daughter project. :) It is Chase from Paw Patrol made by Darkcrash. He also made Marshal, which i built before. First some build pictures :) /Wilhelm
  4. W

    PaperFactory (Deformed airplanes)

    Hello There are some new plane... / Wilhelm
  5. W

    Next build: Steampunk :)

    thank you everyone thumbsup
  6. W

    Next build: Steampunk :)

    Here is the finished model. Conclusion: A model with a lot of missalignments, Not all parts fitted and needed corrected. It has no internal formers, that is a must for a model as big as this on, the wingspan is about 60 cm. But it is a nice model in the end. But you have to put at lot of work...
  7. W

    Next build: Steampunk :)

    The tailplanes and windshield And the skids. I had to remake them because the sag. I laminated the skids with cardstock, total 3 mm. I made an extra leg in front of the skids, as you can see in the pictures When I put the plane on the skids the body was to heavy and saged in the middle...
  8. W

    Next build: Steampunk :)

    The electro-thingies I laminatet the round blue pieces to get a more glas-feeling. And mounted on the plane / Wilhelm
  9. W

    Next build: Steampunk :)

    Some more engine-parts. I needed to strenghen the pipes that attache the engine to the body. I used rolled paper over a drinking-straw and then covered everything with the pipe-parts. I omitted the bends because they were to fiddely and teared easily And here are the engines attached to the...
  10. W

    Next build: Steampunk :)

    and here are the repairs, I am satisfied with it, I took some artistic liberties And I moved the engine-holes where they should be... / Wilhelm
  11. W

    Next build: Steampunk :)

    :headbange::headbange::headbange: I then noticed that I hade managed to switch place on the middle part. Because the engine parts did not aligne. But I have some ideas to clear this misstake More to come..... / Wilhelm
  12. W

    Next build: Steampunk :)

    The wings are mounted. There was some missfitting and I had to reinforce the joints to get a good hold. I used spare parts ( the bands at the wingroots, last picture) to cover up the gaps that were reinforced. As I said before, the nosecone also had fittingproblems. I had to cut of some...
  13. W

    Next build: Steampunk :)

    and on to the engines. I laminated the rings and made formers to this. / Wilhelm
  14. W

    Next build: Steampunk :)

    Here is the whole body assembled. I started greebling the bands. This model is BIG, My cuttingmat is A3. / Wilhelm
  15. W

    Next build: Steampunk :)

    I was not satisfied first so i made a new attempt. I was thinking of greebling a bit so I cut all the individual part and made tabs and in that way I hade a better fit of the parts. In the second picture you can se how I follow the centerline of the parts. The nose-cone was frustating to make...
  16. W

    Next build: Steampunk :)

    I have been building this back and forth, inbetween other responsabilities. This build is a real challenge. Here is how far I have come. First of the wing. I had to make my one spars to give some stability to the wings and to have something to attach to the main body. When build the wing are...
  17. W

    PaperFactory (Deformed airplanes)

    Hello Just a head-ups.. :wave: There are a couple of new downloads over at PaperFactory https://ta7080.wixsite.com/paperfactory / Wilhelm
  18. W

    Next build: Steampunk :)

    About the nosecone. That was my second attempt. The first one was without tabs but it didnt line up well. But in other cases the best aproache to petals is without tabs, I know.thumbsupthumbsup and I still hate petals ;);)
  19. W

    Next build: Steampunk :)

    Now to the nose cone. I have to say that I hate petals :bulgeeye: I still have to tidy up the nose cone. / Wilhelm
  20. W

    Next build: Steampunk :)

    Hello my friends :wave: This is how far I am with this. The formers are made. I had to adjust the width on some parts. Some of the formers you can see in the background in the second picture. See picture below. I followed the center line of the pieces ( the blue line ) to line up the parts...