Search results

  1. C

    1/250 USS Monitor 1862 build.

    Insert B3, slot down and the short end facing the gun openings and glue.
  2. C

    1/250 USS Monitor 1862 build.

    Insert and glue B4 with the slot up and perpendicular to the gun openings.
  3. C

    1/250 USS Monitor 1862 build.

    Make sure you cut out the middle slots as they interconnect with each other.
  4. C

    1/250 USS Monitor 1862 build.

    If you are going to add the Canon’s then cut out B3 & B4.
  5. C

    1/250 USS Monitor 1862 build.

    Place inside B5 and line up the ovals with the gun opening and glue.
  6. C

    1/250 USS Monitor 1862 build.

    Roll B6 slightly to match the curve of B5.
  7. C

    1/250 USS Monitor 1862 build.

    If you are not going to install the Canon’s then cut out B6 which is the gun doors.
  8. C

    1/250 USS Monitor 1862 build.

    Test fit B1 inside B5, and trim till just slightly snug then set flush with bottom. Make sure that the blacked out area is in front of the gun openings and the line at the bottom is lined up with the seam in the back of B5. Then glue from the inside.
  9. C

    1/250 USS Monitor 1862 build.

    Next, cut out B1 just inside the black line.
  10. C

    1/250 USS Monitor 1862 build.

    Test fit inside B5 and trim till just slightly snug then set aside for later.
  11. C

    1/250 USS Monitor 1862 build.

    Next, cut out B2 just inside the black line.
  12. C

    1/250 USS Monitor 1862 build.

    Roll B5 into a tube and Butt glue the ends or make a tab as shown.
  13. C

    1/250 USS Monitor 1862 build.

    Cut out B5 and cut out the Blue Ovals for the gun openings.
  14. C

    1/250 USS Monitor 1862 build.

    Start with making the Turret first. Parts list: B2, B3, B4, B5, B6, B7, B8, & B9.
  15. C

    1/250 USS Monitor 1862 build.

    This will be a build report on the 1/250 USS Monitor 1862 by InPaperDesigns that just became available at www.ecardmodels.com. The kit is waterline and has options for both during and after the Battle of Hampton Roads. I will be doing a step by step build showing both options for building. I...
  16. C

    catboats and a yacht

    lizzie, both look great. I have to admit, I don't know much about boats. My father did, wish he were still here, he would be able to share some info. He pasted away last year in May. From what I have found, both this boat and catboats share the same basic design, forward mast and flat...
  17. C

    catboats and a yacht

    lizzie, no I don't have any experience with this model, just so glad to see you back here. How have you been, was wondering what ever happend to you. Have you published any of your novels? I'm a si-fi guy myself. Would love to read what you have wrote. Hope someone here can help you with...
  18. C

    St. Valentine's day is coming!

    That is very nice. Did you save the files for this and would you be willing to share it with us? My best to you.
  19. C

    Free model#3 Skips BumbleBee Camaro Concept.

    Paul, on the clear sheets you printed that the ink did not dry, try using a hair drier to make the ink more solid. It still won't stick to the plastic sheet, but after that spray it with a clear coat spray. That should seal it to the sheet.
  20. C

    Free Model #3 - HMS Dreadnought by Mark_1984

    Looking good Mark. Keep up the good work. My best to you.
Top Bottom