Thank you micah that was exactly the problem that I had. I dont know why I didnt see it on the alpha build.
Rogue one Tie Striker design thread
- Thread starter mijob
- Start date
Both wing suports ready to be mounted on the fuselage.
But first adding the energy grids on the wing and then a pre installation to see if everything fits as planned. Till next time.
But first adding the energy grids on the wing and then a pre installation to see if everything fits as planned. Till next time.
First wing done. Its the underside of the right wing. Next is the upperside. Not too much modifications needed.
Keep in mind not to put the ruller on the wing when the energy grid is glued onto the wing.
A couple post back I mentioned the layerd wing. Well I took a picture to show the amount of layers.
And here is the otherside of the wing.
And a closeup of the greeblings.
And next wing us comming up.
And a closeup of the greeblings.
And next wing us comming up.
First update after my summerbreak.
All the greebies are glued on the wings.
Wing mounts installed. And now is the big day to join the wings on the fuselage.
All the greebies are glued on the wings.
Wing mounts installed. And now is the big day to join the wings on the fuselage.
This is my fasted update.
I have to share these pics I realy love them.
And the wings are keeping there position.
Thats a huge relieve.
I have to share these pics I realy love them.
And the wings are keeping there position.
Thats a huge relieve.
In one of the tbreads someone mentiond to use clear vernis on rolled parts I tried it and afcource it works. All the pigment stayed on the paper and its easier to roll the paper.
The midle part is sprayed.
Thank you for this suggestion.
The midle part is sprayed.
Thank you for this suggestion.
Last edited:
And here are some quick shots.
Beauty shot will come at a later moment.
Now Im working on some template corrections. some parts I have to rebuild to check the fitting. If everything is correct I will start with the building instruction. Oops I forgot that I need to make a stand for this model and for the phantom as well. Still a lot off work to be done before starting with the bomber.
Beauty shot will come at a later moment.
Now Im working on some template corrections. some parts I have to rebuild to check the fitting. If everything is correct I will start with the building instruction. Oops I forgot that I need to make a stand for this model and for the phantom as well. Still a lot off work to be done before starting with the bomber.