Rogue one Tie Striker design thread

mijob

Tie designer
Staff member
Moderator
Today I build the first test wing. And I made some modifications on the hinge. After building the wing I changed the drawing some parts dudn't end up the way I planned.
So here are some pictures.
20220416_214900.jpg20220416_214911.jpg20220416_214923.jpg20220416_214933.jpg20220416_214944.jpg
The only thing is the wings are to heavy so I need a wedge to keep the wing in position.

Also I tested a new sphere I will show it next time. Happy easter!
 
Last edited:

mijob

Tie designer
Staff member
Moderator
attached you will find new pictures of the strikers progress.
Removable main hatch.
20220424_142517.jpg
And the bottom parts.
Only thing its mounted in the wrong way. Rear should be the front. :hammerhead:
Its not a big problem I can still test build all the parts.
20220424_142459.jpg
Next up Making minor adjustments in the drawing. And designing the front bottom laser gun.
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
looking great here. I have the tiny 1/144th scale by Bandai, so this would be much bigger.
 

mijob

Tie designer
Staff member
Moderator
This evening I worked on the wings I hope the weight is lower so the wing can hold the position. No pics yet.

Also I made the rear hatch and attached the wing mount.
20220425_202003.jpg20220425_202017.jpg20220425_202030.jpg
Tomorow I will test the new wings. If they are still to heavy I will try to put some glue on the wooden stick.
 
Last edited:
Top