- Apr 5, 2013
- 13,498
- 9,550
- 228
That is an excellently build section. You're going to have one heck of a ship when your done! 
To Voyage to the Delta Quadrant (for the third time....) :)
- Thread starter Cybergrinder
- Start date
Thanks Zathros!
Here's the patched name & registry number piece.
For those interested, my patching technique involves having a duplicate page printed on the thinnest paper you can get, then you cut out the shape/area you need to patch and glue. I have to admitt, it's needed more with the black paper inner
Here's the patched name & registry number piece.
For those interested, my patching technique involves having a duplicate page printed on the thinnest paper you can get, then you cut out the shape/area you need to patch and glue. I have to admitt, it's needed more with the black paper inner
And now, the upper hull complete, and greebled!
Ok, the bridge will be added after the lighting....
I chose to connect the neck now, since it's such a visually important joint and previously I've struggled to get this joint neat. The idea is then to "drop" the entire top section onto the completed hull,, adding the edge pieces afterwards.
Now the inner support (which I completed earlier)
I'm going to have to do some "surgery" to accommodate the lights, ringed in red.
And now the wiring....
Ok, the bridge will be added after the lighting....
I chose to connect the neck now, since it's such a visually important joint and previously I've struggled to get this joint neat. The idea is then to "drop" the entire top section onto the completed hull,, adding the edge pieces afterwards.
Now the inner support (which I completed earlier
)I'm going to have to do some "surgery" to accommodate the lights, ringed in red.
And now the wiring....
Yes! Just WOW!
Impressive work! This is inspiring!
(With a little photo and post- work you could convince us this is the real thing)
Impressive work! This is inspiring!
(With a little photo and post- work you could convince us this is the real thing)
- Apr 5, 2013
- 13,498
- 9,550
- 228
Fantastic!!!
WOW!
(There you have it! )
This might become a regular phenomenon in this thread.
WOW!
(There you have it!
)
Thanks everyone, I'm flattered!
A quick tally of LEDs, 22 required for the saucer, add to the 28 already in the hull. Nice round 50!
A quick tally of LEDs, 22 required for the saucer, add to the 28 already in the hull. Nice round 50!
That is why I like smaller scaled ships, that way I can use just a couple LEDs as light sources, and Fiber optics to get the light where it shines.
I look at your build and I actually get excited, this is why I love paper models!
Ok, so I added some additional supports to help support the LEDs, here we go with the LEDs placed in the approximate locations
Quick update, wiring almost complete and the supports are being attached to the lower half of the ship