rc helicopter problem?

Discussion in 'RC Aircraft & Watercraft' started by tay n, Apr 26, 2007.

  1. tay n

    tay n New Member

    Joined:
    Apr 26, 2007
    Messages:
    1
    Likes Received:
    0
    Dose any one have a problem with there rc helicopter stay still and lifting off high enough ?
  2. steamhead

    steamhead Active Member

    Joined:
    Apr 17, 2005
    Messages:
    2,527
    Likes Received:
    0
    Everybody...!!!
  3. Bad_Scorpion

    Bad_Scorpion Member

    Joined:
    Jul 2, 2006
    Messages:
    365
    Likes Received:
    0
    Yep same here. But got a new issue and havign issues figuring it out, hit 50% throttle on my walkera 22e and pitches to the right front every time. thinking gyro may be out cause can adjust all over the place and still pitches to the right front when adjust everything to compensate. Any ideas anyone
  4. steamhead

    steamhead Active Member

    Joined:
    Apr 17, 2005
    Messages:
    2,527
    Likes Received:
    0
    The piching could be a result of torque from the blades and motor, or from the motor, if the motor is mounted horizontally. If you're using a gyro to control the tail blades, set it to its lowest sensitivity, as it may be over-compensating to blade torque.
  5. paper-toys

    paper-toys FOUNDER OF PAPER-TOYS

    Joined:
    Jun 10, 2007
    Messages:
    97
    Likes Received:
    0
    I've been having the same problem when trying to keep the helicopter while lifting off the ground.
  6. Bad_Scorpion

    Bad_Scorpion Member

    Joined:
    Jul 2, 2006
    Messages:
    365
    Likes Received:
    0
    Yep same here. And, steamhead thank you. that was what it was. just adjusted, fired it up had to tinker with it couple of times to really fine tune it and then lift off.
  7. steamhead

    steamhead Active Member

    Joined:
    Apr 17, 2005
    Messages:
    2,527
    Likes Received:
    0
    Glad I could be of help...