Imcold X-Wing - discussion/building thread (http://xwingpm.wz.cz/)
- Thread starter starbuck
- Start date
Thank you for pointing this out, Starbuck.
To sum it up - parts are mislabeled in the instruction drawing. They are corectly designed and labeled in the template itself.
This is exact, what I wanted to say.
Next parts put together.
Tip:Before gluing, check that these parts fit to the wings. I first glued inside and then they did not fill the white parts on the wings.
Next parts cut out. I do not habe an exact idea how and where to place them. I hope my plastic model will show me the way.
Tip:Before gluing, check that these parts fit to the wings. I first glued inside and then they did not fill the white parts on the wings.
Next parts cut out. I do not habe an exact idea how and where to place them. I hope my plastic model will show me the way.
Attachments
@bigpetr - OH YES IT DOES HELP - MANY THANKS.
Thats why I love zealot.com - you will always get help if you need.
-------
@ part 1 in bigpetr´s picture it is named w19 in the instruction, but I think it should be named w26.
Thats why I love zealot.com - you will always get help if you need.
-------
@ part 1 in bigpetr´s picture it is named w19 in the instruction, but I think it should be named w26.
Additonal question regarding bigpetrs part 6.
Why double? Optional which to use as they have different colours?
----------------------------------------------------------------------------
I tried all possible combinations and decided to take the brighter parts, as they fit better to the rest of the wing.
I glued them on an additional layer of paper to make them pop-up.
Pictures to follow.
Why double? Optional which to use as they have different colours?
----------------------------------------------------------------------------
I tried all possible combinations and decided to take the brighter parts, as they fit better to the rest of the wing.
I glued them on an additional layer of paper to make them pop-up.
Pictures to follow.
Last edited:
Ok first two wings done. I am not sure how the moving wings have to be installed. I think it might be seen better when all wings are ready.
Now I will do the other wings, witch will take some time
Now I will do the other wings, witch will take some time
some posts before:
@ Additonal question regarding bigpetrs part 6.
Why double? Optional which to use as they have different colours?
-----
The answer is: parts are needed on both sides of the wing.
I forgot to place them on the inner side - you can also see on the picture.
Meantime corrected;-)
@ Additonal question regarding bigpetrs part 6.
Why double? Optional which to use as they have different colours?
-----
The answer is: parts are needed on both sides of the wing.
I forgot to place them on the inner side - you can also see on the picture. Meantime corrected;-)
Based on the small parts I decided to make a test to be sure to avoid mistakes. Most parts are on thin paper, only few are made of thicker paper, which was also one of the reasons for a testbuild. Never worked with thin paper before. (Beside adding an additional layer to a part.)
Here first picture.
Here first picture.
