Starcraft Zealot

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
I believe every time someone puts up a model of this, the company owning the copyrights demand removal. You could try the "Wayback" machine, but I don't think you will have good luck because it was hosted by MediaFire, and they state it was removed due to copyright violation.
 

johanvanacker

Active Member
I believe every time someone puts up a model of this, the company owning the copyrights demand removal. You could try the "Wayback" machine, but I don't think you will have good luck because it was hosted by MediaFire, and they state it was removed due to copyright violation.

It is strange then that other starcraft models remain available for download, just not this one.
I'm not familiar with the "wayback" machine.
 

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
I am happy it is the one you wanted. I can usually track these things down. :)
 

johanvanacker

Active Member
Usually I take my pick from the free models I encounter on the internet.
But when I encountered this one, I couldn't find any trace of the model although plenty photo's can be found.
I guess I'll have to exercise my Spanish a bit more ...
 

Rogerio Silva

Active Member
Getting what you want...

Johan

The link Zathros sent is working properly; if I understood it correctly, you couldn't find where to download it? If that's the case, I'm sending attached a picture (free link), so that you can get it.
It'll be downloaded in RAR, just uncompress it, and you'll have a PDO, which you can obviously print using Pepakura.
I hope it helps, if you haven't got it yet.
All the best,

Rogério

P.S. A thousand posts! YAY! :mrgreen: :thumb: :cool:
 

Attachments

  • test.jpg
    test.jpg
    126.6 KB · Views: 16

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
I speak Spanish, and a little German, enough so that with a translator program, I can figure out the idioms. Being multilingual helps, widens the field for dating too! Though my wife said I can't date anymore. :)
 

johanvanacker

Active Member
I speak Spanish, and a little German, enough so that with a translator program, I can figure out the idioms. Being multilingual helps, widens the field for dating too! Though my wife said I can't date anymore. :)
'Google translate' is my help usually in these cases.

Thank you Rogerio for your assistance, but I had it already downloaded.
Now checking the model in pepakura and printing it later.
 

johanvanacker

Active Member
I'm glad you could get it. Should we expect a building thread soon?
Well, I printed the sheets yesterday evening after I enlarged the scale a bit to make a finished model size of 30 cm. I noticed that there are some small errors in the pdo, but we'll see how it goes.
If I'm not to busy this week, should start building it right away.
 

johanvanacker

Active Member
Some pictures of the first part of the first foot.
Some flaws in the model are already showing: every joint is open and not connected to the other part of the leg.
20130810_150807.jpg
20130810_224419.jpg
20130813_193030.jpg
20130813_193048.jpg
 

johanvanacker

Active Member
I had some time last week to continue the model. Here are some pictures to show the progress. I concentrated on the attachments, as they are quickly build and do not require much preparation.
20131011_220324.jpg
20131011_220345.jpg
 
Top