Halo Spartan WIP

PreacherMan

New Member
Thanks all! Yeah, I'm really regretting not making a smaller, more streamlined helmet in my initial build before investing so much time in this, but you live and learn. I'll try and trade it or something eventually, or just build another.

There's only really inner hardening and bondo left to do, the card work is almost done. An undersuit has been started and it does a good job of filling the gaps-

934717_4445561831581_1607942999_n.jpg


Here it is with armour, just to give an idea of how it works

936798_10151384052257927_766015182_n.jpg
 

PreacherMan

New Member
Thanks all! I feel this should be in 'gaming', but I don't know if that subforum existed when I made this thread. Perhaps it did and I'm retarded.
Either way, it's raining to all hell here so there won't be much hardening work done this week- however, in the downtime I made an entirely new helmet.
Noble 6, ladies and gentlemen.
181245_4511515280376_1022945087_n.jpg
 

Rogerio Silva

Active Member
OH, man, that's so cool! I'll have to try to do this soon enough...
Here's not the Game of Thrones, but "winter is coming" (HOHOHOHOH...) and I'll soon be able to try somehing like that, because the warmth of the climate here doesn't allow so...
 

PreacherMan

New Member
It's too warm in Brazil for pepakura? :(

306725_4530869244213_1530908996_n.jpg


Everything but the top right shoulder is fiberglassed and ready for bondo'ing, the helmet and the torso are almost done!

969419_4530897964931_562227460_n.jpg
 

Rogerio Silva

Active Member
You wouldn't bear...

It's too warm in Brazil for pepakura? :(
(...)
PreacherMan

First of all, that's a beautiful work, I'll have to walk in that path someday soon. And I'll be bugging you for tips and tricks, oh, boy! :twisted: :twisted:
About the "too warm", well... In the summer, in Rio, temperatures can get up to 45ºC (113ºF), and since Rio has a lot of hills, some warm air pockets do form, making the thermal sensation go up to 55ºC (131ºF).:cry:
That's no problem if you live close to the shore, because of the wind, and that's why tourists stay in those areas (well, it's quite beautiful, too!:mrgreen:).
Got a glimpse? :wave:
 

PreacherMan

New Member
I don't know if it can be too hot for fibreglassing! I imagine the humidity may effect it negatively, or make it very uncomfortable. It's mostly cold that does it, the warmer it is the faster it seems to work.

941998_4535972731797_103235667_n.jpg


Cut it apart and made it wearable today! Everything is fiberglassed now. I aim to have this done by next Sunday.
 

gideon1962

New Member
This is positively amazing! If only I was thirty years younger, now I'm afraid it wouldn't fit around my pot belly! But really, you have remarkable talent and PATIENCE to create this outfit. doesn't it get hot?
 

Rogerio Silva

Active Member
Custom made

This is positively amazing! If only I was thirty years younger, now I'm afraid it wouldn't fit around my pot belly! But really, you have remarkable talent and PATIENCE to create this outfit. doesn't it get hot?
Gideon

The good thing about those pep file armors is that you can make them fit you with a few clicks. Then, the process is as magnificently described by PreacherMan: print, glue, resin, fiber, sand, paint and wear it! :thumb: :thumb: :thumb:
 

vbsargent

Member
doesn't it get hot?


Yeah, you could say that. Had a Mandelorian inspired rig years ago, had to adjust it so I could breath cooler fresher air every hour or so.They get really, REALLY hot. And that's just walking around in an air conditioned hotel, outside is worse- and I can't imagine on a set with filming lights heating everything up to 104 degrees. :eek:


BTW- looks really good preacherman! Very clean and crisp. It also looks like you did a great job of keeping it symmetrical and in shape while resining it up. . Puts me in mind of getting back into the costuming frame of mind again. Never did finish my stealth armor design. :rolleyes:

vbsargent
 

zathros

*****SENIOR ADMINISTRATOR*****
Staff member
Administrator
Moderator
When I was growing up, my Mom was a seamstress during the day, and built electronics for missile guidance systems at night! We had a small sewing factory in the basement of our house and made coats and jackets for the local stores. This was a New England of the 1960's

I just mention this because I don't think people understand how much work goes into making costumes like that. Yes, the Helmets,and all the fiberglass, but the actual clothes to tie it all together, even if you are cutting things and putting them back together with other bits, well, that's a lot of work, and you have pulled if off really well! ! :)
 

PreacherMan

New Member
Thanks all! Progress is coming along slowly, my job allows me to work on stuff pretty much the entire time so progress is coming along quickly- all things willing, everything but the electronics will be done by Saturday.
Sadly I didn't do the best job at keeping everything symmetrical.. there's three or four pieces that needed to be scrapped as they deformed during resining or bondo stage. :(
I need to entirely redo a shin due to warping.

941632_4545981982022_1793337289_n.jpg


As you can see, the shin piece to the left is slightly compressed inwards.

The torso is almost done, as well as the bracers- the shoulder pieces and the thighs are the last bits. The boots and the kneepads will be made from foam. :)

Been tearing apart dollar store lights for their components and am working on two things- a speaker system to sit in the stomach, and lights in all the spots where the real one has them.

Noble_6_by_HellJumperGrif.jpg


Found a bunch of dollar store finger lights with a nice blue tinge, looking into a way to diffuse the light.
 

micahrogers

Moderator "Where am I, and how did I get here?"
Staff member
Moderator
cheapest way to difuse the light is onion-skin paper. most better art suply stores will have it or tale clear lexan and frost it.
 

vbsargent

Member
Depending on how cheap you want to go, you could use baking parchment paper. It is translucent enough that you can use it to trace, but can withstand a few hundred degrees without browning.

vbsargent
 

PreacherMan

New Member
Thanks! Actually, I'm gonna try that, that's a way more clever idea than what I was doing (dremelling apart translucent white plastic from dollar store electric glowsticks).

Anyhow, before I read this, I shoved some lights into the almost-finished torso.

931445_4551371236750_2012363283_n.jpg


Started tossing a pistol together... it is ugly for now, but it's a work in progress.

947104_4551025028095_2138522905_n.jpg


Only things left to do are bondo'ing and sanding the limbs, and the kneepads and feet (foam)!

181457_4551599962468_1871025923_n.jpg


My friends have caught the bug as well... we've started a full group.

970675_4551248473681_1438732877_n.jpg
 

Rogerio Silva

Active Member
NO, PreacherMan, NO, don't pass me that bug now, I have to STUDY! Nooooooooo!
Too late... MWAHAHAHAHAHAHA... But I'll have to take some pills to keep it under control till after my exams and suspended projects... :cry:
 

vbsargent

Member
Now all you guy gotta do is pain themt up as Red vs Blue! sign1
They all look great! And man does that blue light look good! Wish all these things were around back in the day when I made my Star Wars armor (that was what- around '96 or '97).


vbsargent
 

PreacherMan

New Member
Update! Upper is mostly done. This isn't wearing the undersuit or anything, and the handplate isn't done.

297108_4558816982889_336871629_n.jpg


575621_4558759981464_320325931_n.jpg


Only bondo/sanding is left! Thighs, shins and belt need to be done.

The kneepads and boots are being made from foam, picked up a pair of 8" high laceless boots earlier.
 
Top