Enya Air Engine

Bro_28 · 01-04-2004, 09:01 PM

I have an Enya .60 engine, model 7032....considering I'm a total electric guy I have no clue how to even hook this thing up. I was thinking about building an airboat for it or sticking it in a plane. Any help on how to hook it up would be awesome.

-Bro

rockn82 · 01-05-2004, 01:26 AM

All you need to hook it up is:
A fuel tank with two lines(one for pressure from the silencer to the tank. One from the tank to the carb.)
A .60 Engine mount for aircraft or a way to mount it.
An engine starter or start stick (something to turn the prop)
A glow plug heater/starter.
and thats about it. You should probably run the engine before you get it all mounted and such to make sure it is worth messin with. And remember being air cooled you will want the engine to have as much airflow over it as possible

Bro_28 · 01-18-2004, 04:16 PM

That is what I would've thought...after some extensive research I have found that the engine is liquid cooled...there is two ports in the cylinder head for water to flow into and out of....however I had the hardest time finding anything on the web about it....is it rare or something? I also found out its a ringed piston...two rings to be exact. Very odd engine compared to what I've seen.

oliver · 01-23-2004, 10:45 AM

I havent found anything on the net either but, I reckon its a Inboard Boat engine.Most boat engines have watercooled heads with a pipe that pums the water from the back of the fin by means of a pickup through the head and out the other side.If you can supply a pic i would be able to tell you....Enya boat engines are very scarce.

01-04-2004, 09:01 PM	#1
Bro_28 Inactive Member Join Date: Jan 2004 Location: . Posts: 5 Downloads: 0 Uploads: 0	Enya Air Engine I have an Enya .60 engine, model 7032....considering I'm a total electric guy I have no clue how to even hook this thing up. I was thinking about building an airboat for it or sticking it in a plane. Any help on how to hook it up would be awesome. -Bro

01-05-2004, 01:26 AM	#2
rockn82 Marx Brother Join Date: Nov 2002 Location: Minnesota Posts: 380 Downloads: 0 Uploads: 0	All you need to hook it up is: A fuel tank with two lines(one for pressure from the silencer to the tank. One from the tank to the carb.) A .60 Engine mount for aircraft or a way to mount it. An engine starter or start stick (something to turn the prop) A glow plug heater/starter. and thats about it. You should probably run the engine before you get it all mounted and such to make sure it is worth messin with. And remember being air cooled you will want the engine to have as much airflow over it as possible __________________ RocK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SH.28 engine	hogster8	RC General & Getting Started	12	08-24-2005 10:48 AM
rivarosi engine - where can i have rivarosi engine repaired?	jim409	FAQs	7	01-06-2005 02:19 PM
GMS 1.2 Engine	flycatch	RC General & Getting Started	0	04-25-2004 05:10 PM
WHICH ENGINE	TEE	RC Onroad Forum	5	01-25-2004 07:17 PM
Any one know where to get this engine ??	Deadlego	RC General & Getting Started	2	11-23-2003 04:03 PM

01-18-2004, 04:16 PM	#3
Bro_28 Inactive Member Join Date: Jan 2004 Location: . Posts: 5 Downloads: 0 Uploads: 0	That is what I would've thought...after some extensive research I have found that the engine is liquid cooled...there is two ports in the cylinder head for water to flow into and out of....however I had the hardest time finding anything on the web about it....is it rare or something? I also found out its a ringed piston...two rings to be exact. Very odd engine compared to what I've seen.

01-23-2004, 10:45 AM	#4
oliver Inactive Member Join Date: Jan 2004 Location: Pretoria, Guateng, South Africa. Posts: 6 Downloads: 0 Uploads: 0	I havent found anything on the net either but, I reckon its a Inboard Boat engine.Most boat engines have watercooled heads with a pipe that pums the water from the back of the fin by means of a pickup through the head and out the other side.If you can supply a pic i would be able to tell you....Enya boat engines are very scarce.