Pull start

Justin_E · 07-15-2004, 09:48 PM

Could you guys tell me what kind of pull start would fit my RC10 GT? Maybe a link, and how much they usually cost. thanks
justin

Trashcanoccupant449 · 07-16-2004, 12:24 AM

What kind of motor are you running? Pullstarts usually cost about $15 on ebay and probably a little more if you order through your LHS.

Justin_E · 07-16-2004, 01:50 AM

stock .15

dj6666969 · 07-16-2004, 04:01 AM

Justin, with the stock engine use the exact pullstart, I dont know of any 1 who makes a electric 1 for the gt yet

redheat · 07-16-2004, 10:57 AM

Whats wrong with the one you have?

Justin_E · 07-16-2004, 01:43 PM

the rope pulled out, so I took it apart, then the spring came out, then I spent like 30 minutes trying to put the spring in, the the spring snapped, so now I need a new pull start! lol

dj6666969 · 07-16-2004, 02:25 PM

I belive that a company called HG makes a thing called a yank eliminator, I had just found it in 1 of my mags there web site is www.1hg.com, they are sort of like wha I told you b4 with a drill but these have the right tip for a 1 way bearing!

dj6666969 · 07-16-2004, 02:49 PM

sorry www.1hg.com

redheat · 07-16-2004, 03:31 PM

you can purchase a new spring for a couple of bucks , there not that difficult to repair, the hole unit is about 30.bux.

Justin_E · 07-16-2004, 03:42 PM

Ya, I didnt know that. I think its pretty hard to put the spring back in

redheat · 07-16-2004, 03:49 PM

It's not hard at all, just take your time.Do you have a manuel ? It shows you which way to put it in. Call your LHS to see if they have one in stock most do . While you have it out clean your one way bearing to.

Justin_E · 07-16-2004, 03:52 PM

I dont think there is a manual for my pull start.

redheat · 07-16-2004, 04:08 PM

Go to the AE site they have all the info. for fixing it . Did you get your gt new in the box? comes with a instruction booklet, and a brown sheet of paper that that shows parts and how to.

lostdogeater · 07-17-2004, 03:02 AM

Yeah my pullstart has come apart twice in my trx .15

It is really pising me off. lol , right now im using a drill to start my truck. It works ok, but pullstarts are hard to put back in, but if you take your time and be careful, you will be successful.

Justin_E · 07-17-2004, 02:12 PM

I got a whole new pull start, they didnt have the spring,and I didnt wanna wait for them to order it, cuz me and my bro were gonna go drive at a BMX park.

07-15-2004, 09:48 PM	#1
Justin_E Inactive Member Join Date: Jun 2004 Location: Central Coast, CA, USA. Posts: 437 Downloads: 0 Uploads: 0	Pull start Could you guys tell me what kind of pull start would fit my RC10 GT? Maybe a link, and how much they usually cost. thanks justin

07-16-2004, 04:01 AM	#4
dj6666969 Senior Member Join Date: Feb 2004 Location: Weston, Wisconsin, USA. Posts: 2,041 Downloads: 0 Uploads: 0	Justin, with the stock engine use the exact pullstart, I dont know of any 1 who makes a electric 1 for the gt yet __________________ My rc pics! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check out my new forumhttp://dj6666969.proboards22.com/index.cgi Starburst wrappers, send them to me!

07-16-2004, 10:57 AM	#5
redheat Senior Member Join Date: May 2004 Location: USA. Posts: 1,000 Downloads: 0 Uploads: 0	Whats wrong with the one you have? __________________ TC3,B4,T3,RC10GT,and 2 TMaxxes lets go racing

07-16-2004, 02:25 PM	#7
dj6666969 Senior Member Join Date: Feb 2004 Location: Weston, Wisconsin, USA. Posts: 2,041 Downloads: 0 Uploads: 0	I belive that a company called HG makes a thing called a yank eliminator, I had just found it in 1 of my mags there web site is www.1hg.com, they are sort of like wha I told you b4 with a drill but these have the right tip for a 1 way bearing! __________________ My rc pics! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check out my new forumhttp://dj6666969.proboards22.com/index.cgi Starburst wrappers, send them to me!

07-16-2004, 02:49 PM	#8
dj6666969 Senior Member Join Date: Feb 2004 Location: Weston, Wisconsin, USA. Posts: 2,041 Downloads: 0 Uploads: 0	sorry www.1hg.com __________________ My rc pics! To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. check out my new forumhttp://dj6666969.proboards22.com/index.cgi Starburst wrappers, send them to me!

07-16-2004, 12:24 AM	#2
Trashcanoccupant449 Inactive Member Join Date: Dec 2003 Location: Bangor, Maine, USA. Posts: 218 Downloads: 0 Uploads: 0	What kind of motor are you running? Pullstarts usually cost about $15 on ebay and probably a little more if you order through your LHS.

07-16-2004, 01:50 AM	#3
Justin_E Inactive Member Join Date: Jun 2004 Location: Central Coast, CA, USA. Posts: 437 Downloads: 0 Uploads: 0	stock .15

07-16-2004, 01:43 PM	#6
Justin_E Inactive Member Join Date: Jun 2004 Location: Central Coast, CA, USA. Posts: 437 Downloads: 0 Uploads: 0	the rope pulled out, so I took it apart, then the spring came out, then I spent like 30 minutes trying to put the spring in, the the spring snapped, so now I need a new pull start! lol

07-16-2004, 03:31 PM	#9
redheat Senior Member Join Date: May 2004 Location: USA. Posts: 1,000 Downloads: 0 Uploads: 0	you can purchase a new spring for a couple of bucks , there not that difficult to repair, the hole unit is about 30.bux. __________________ TC3,B4,T3,RC10GT,and 2 TMaxxes lets go racing

07-16-2004, 03:42 PM	#10
Justin_E Inactive Member Join Date: Jun 2004 Location: Central Coast, CA, USA. Posts: 437 Downloads: 0 Uploads: 0	Ya, I didnt know that. I think its pretty hard to put the spring back in

07-16-2004, 03:49 PM	#11
redheat Senior Member Join Date: May 2004 Location: USA. Posts: 1,000 Downloads: 0 Uploads: 0	It's not hard at all, just take your time.Do you have a manuel ? It shows you which way to put it in. Call your LHS to see if they have one in stock most do . While you have it out clean your one way bearing to. __________________ TC3,B4,T3,RC10GT,and 2 TMaxxes lets go racing

07-16-2004, 03:52 PM	#12
Justin_E Inactive Member Join Date: Jun 2004 Location: Central Coast, CA, USA. Posts: 437 Downloads: 0 Uploads: 0	I dont think there is a manual for my pull start.

07-16-2004, 04:08 PM	#13
redheat Senior Member Join Date: May 2004 Location: USA. Posts: 1,000 Downloads: 0 Uploads: 0	Go to the AE site they have all the info. for fixing it . Did you get your gt new in the box? comes with a instruction booklet, and a brown sheet of paper that that shows parts and how to. __________________ TC3,B4,T3,RC10GT,and 2 TMaxxes lets go racing

07-17-2004, 03:02 AM	#14
lostdogeater Inactive Member Join Date: Sep 2003 Location: . Posts: 21 Downloads: 0 Uploads: 0	Yeah my pullstart has come apart twice in my trx .15 It is really pising me off. lol , right now im using a drill to start my truck. It works ok, but pullstarts are hard to put back in, but if you take your time and be careful, you will be successful.

07-17-2004, 02:12 PM	#15
Justin_E Inactive Member Join Date: Jun 2004 Location: Central Coast, CA, USA. Posts: 437 Downloads: 0 Uploads: 0	I got a whole new pull start, they didnt have the spring,and I didnt wanna wait for them to order it, cuz me and my bro were gonna go drive at a BMX park.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rc10gt pull start	NoS01	RC Offroad Forum	2	10-16-2005 08:58 PM
pull start isnt engaging anything...	bandit1	RC General & Getting Started	15	08-22-2005 06:41 PM
pull start	Billmo23	RC General & Getting Started	2	04-17-2005 02:18 PM
wtb pull start for p3	diantae	Marketplace - RC and Slot Cars	1	06-28-2004 04:36 PM
pull start question	snopro	RC Offroad Forum	6	06-24-2004 07:26 PM