BAe-146 1:72

Cybermac · 02-28-2011, 03:43 PM

Hi all!

Having a break from B-737, I started designing of BAe-146.
Model is scaled up to 1:36 (2x1:72) to get a better resoults.
And here are some photos...

Best regards to all designers!

Cybermac

Cybermac · 03-06-2011, 09:00 AM

Hi all!

Now I am working on wing-fuselage section.
To do that I made a special structure. I will try to stretch the cardboard to get the exact shape.

Best regards!

GarageSymfony · 03-06-2011, 06:05 PM

Outstanding, Cyber. I can't wait to see more of this one.

Cybermac · 03-07-2011, 11:57 AM

Hi all!

Thanks for your kind words GarageSymfony

And here it is...
(just some small adjustements on the back and should be OK)

As I remember it took me almost a year (!!!) to make a similar part fot B-737, now just a couple of days... Hurray!!!

Best regards!

Cybermac

Ponytail · 03-07-2011, 05:02 PM

Hello Cybermac,
That's what you get when one becomes an experienced, talented and gifted designer.... and you're still growing!
Looks very sharp.
Will the final model be upscaleable till say around 1:33 ?

Greetings
PT

Cybermac · 03-08-2011, 03:54 AM

Many thanks Ponytail!

Yes - the model will be upscaleable till 1:33

My main target is 1:72 (because of small room, small laptop and small printer

), but as all my BAe-146 design is being done in 1:36 there shouldn't be any problem to do 1:33 if only somebody will be interested.

By the way here is the lenght of the model (BAe-200/RJ85):

1:72 - 39.72cm
1:36 - 79.44cm
1:33 - 86.67cm

Best regards!

Cybermac

Cybermac · 03-15-2011, 02:52 PM

Hi everyone!

I have just managed to do the maing gear covering parts which are looking just like here...

Cybermac

Cybermac · 03-16-2011, 06:43 AM

Hello!

For the very first time I put together all pieces of the fuselage and it is... REALLY BIG!

It is more than 70cm long and is almost as long as my desk!

(the drawing on the top is 1:72)

Cybermac

Cybermac · 03-23-2011, 09:59 AM

Hello everyone!

Here is the engine with its special oval shape.
(The middle three sections will become the one piece with a two cuts from the bottom after I will do some 'digital magic'

)

All the best!

Cybermac

imkool · 04-25-2011, 06:57 AM

Nice!!!

F131 · 04-26-2011, 08:23 PM

Very impressive.

03-08-2011, 03:54 AM	#6
Cybermac Member Join Date: Jan 2006 Location: Manchester Posts: 158 Downloads: 16 Uploads: 0	1:33 Many thanks Ponytail! Yes - the model will be upscaleable till 1:33 My main target is 1:72 (because of small room, small laptop and small printer), but as all my BAe-146 design is being done in 1:36 there shouldn't be any problem to do 1:33 if only somebody will be interested. By the way here is the lenght of the model (BAe-200/RJ85): 1:72 - 39.72cm 1:36 - 79.44cm 1:33 - 86.67cm Best regards! Cybermac

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-06-2011, 06:05 PM	#3
GarageSymfony Member Join Date: Jun 2007 Location: Fort Worth, Texas Posts: 22 Downloads: 16 Uploads: 0	Outstanding, Cyber. I can't wait to see more of this one.

03-07-2011, 05:02 PM	#5
Ponytail Inactive Member Join Date: Jul 2004 Posts: 97 Downloads: 73 Uploads: 0	Hello Cybermac, That's what you get when one becomes an experienced, talented and gifted designer.... and you're still growing! Looks very sharp. Will the final model be upscaleable till say around 1:33 ? Greetings PT

04-25-2011, 06:57 AM	#10
imkool Newbie Join Date: Apr 2011 Posts: 5 Downloads: 0 Uploads: 0	Nice!!!

04-26-2011, 08:23 PM	#11
F131 Senior Member Join Date: Mar 2008 Location: Minneapolis, MN Posts: 454 Downloads: 95 Uploads: 0	Very impressive.