pepakura designer 3!

DHL · 08-30-2008, 05:43 AM

NEW

Pepakura designer 3 is downloadable at:http://www.tamasoft.co.jp/pepakura-en/

Jones Brandon · 08-30-2008, 11:24 AM

nice!!!!!!!!!!!!!!!

Stev0 · 08-30-2008, 02:49 PM

I'm rather fuzzy on what has been changed despite reading the actual changes.

D-WHALE · 08-30-2008, 03:10 PM

I think, this version is trash

I can not correct load a mqo-file! with PepDes2 i become this:
(first pic is the rendered version in Metaseq, second pic is the PepDes2 screen shot)

D-WHALE · 08-30-2008, 03:12 PM

But with PepDes3 i have this!

May be i made somthing wrong

Nothing · 09-01-2008, 12:43 AM

Quote:

Originally Posted by Stev0

I'm rather fuzzy on what has been changed despite reading the actual changes.

2 key features i see right off that will be very usefull is being able edit the 3d model and reloaded without redoing the unfold process over and over, and the over flow paint that extends the texture onto the flaps.

FlareBaffled · 09-01-2008, 05:35 AM

Being able to edit te 3D mesh and not have to re-do the unfolding is something I would use ... but you can already bleed the textures over onto the flaps in the current version. The effect is a bit messy, since it is literally just smearing the texture ( it has no actual texture to use, so there is no option really ) but it does ensure the flap is not white and glaring if it can be seen at the join.

Haven't looked at actually upgrading yet... but I might if it proves to be stable and bugless for 3DS import.

Lex · 09-01-2008, 08:45 AM

Got the new Viewer and have to say they've thought a lot about the user-friendliness of the software. If before you want to locate an unfolded part on a complex model, then... good luck. With the new version everything becomes transparent and you can see the part in question immediately. --Hey it's the small things that count!

Nothing · 09-01-2008, 09:52 AM

i dont like that they whant more money for the upgrade

FlareBaffled · 09-01-2008, 09:59 AM

Woah...I didn't notice that before...

"available at $10 for those who bought Pepakura 2 AFTER 1st AUGUST 2008....."

So..if like me, you bought the software a few months before and paid in full, you have to completely pay in full again. At $10 for the new functions I would give it a try. At $38, it is more than I would pay for the new features, and Pep 2 is not that bad after all!

brad4ds · 09-01-2008, 11:00 AM

That is NOT what the site says:

"Pepakura Designer 3 is a shareware product, the shareware fee is US$38.
(If you have a licence for Pepakura Designer 2, you can upgrade to Ver.3 for US$10. We offer a free upgrade licence if you bought Pepakura Designer 2 after August 1, 2008.)"

As long as you have a license for Pepakura Designer 2, it only costs US$10 to upgrade. (I bought it 2 days before August 1, 2008, so it's gonna cost me $10, too. UGH!)

RyanShort1 · 09-01-2008, 11:22 AM

Quote:

Originally Posted by nothing

i dont like that they whant more money for the upgrade

Well, $10 isn't that much for an upgrade. The designer's time is worth something after all. I'd rather pay someone to get something done than wait around and wish for someone to make something free for me.

Ryan

Stev0 · 09-01-2008, 12:39 PM

It's not a lot if you use it often.

Nothing · 09-07-2008, 10:01 AM

any one figure how to change flap size in 3?

Nothing · 09-07-2008, 10:02 AM

anyone figure how to change flap size in3?

08-30-2008, 05:43 AM	#1
DHL Senior Member Join Date: Nov 2007 Location: Gunpo,Korea Posts: 338 Downloads: 329 Uploads: 3	pepakura designer 3! NEWPepakura designer 3 is downloadable at:http://www.tamasoft.co.jp/pepakura-en/ __________________ if someone wants to kill you, kill him first. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

09-01-2008, 05:35 AM	#7
FlareBaffled Senior Member Join Date: Dec 2007 Location: London Posts: 384 Downloads: 24 Uploads: 11	Being able to edit te 3D mesh and not have to re-do the unfolding is something I would use ... but you can already bleed the textures over onto the flaps in the current version. The effect is a bit messy, since it is literally just smearing the texture ( it has no actual texture to use, so there is no option really ) but it does ensure the flap is not white and glaring if it can be seen at the join. Haven't looked at actually upgrading yet... but I might if it proves to be stable and bugless for 3DS import. __________________ Before you insult a man, you should first walk a mile in his shoes. So, when you DO insult him, you are a mile away, and you have his shoes!

09-01-2008, 08:45 AM	#8
Lex Dollmaker Join Date: Dec 2006 Location: Oxford, UK Posts: 2,220 Downloads: 14 Uploads: 3	Got the new Viewer and have to say they've thought a lot about the user-friendliness of the software. If before you want to locate an unfolded part on a complex model, then... good luck. With the new version everything becomes transparent and you can see the part in question immediately. --Hey it's the small things that count! __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Recent works: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. , To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. , To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. , To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. and the To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

09-01-2008, 09:59 AM	#10
FlareBaffled Senior Member Join Date: Dec 2007 Location: London Posts: 384 Downloads: 24 Uploads: 11	Woah...I didn't notice that before... "available at $10 for those who bought Pepakura 2 AFTER 1st AUGUST 2008....." So..if like me, you bought the software a few months before and paid in full, you have to completely pay in full again. At $10 for the new functions I would give it a try. At $38, it is more than I would pay for the new features, and Pep 2 is not that bad after all! __________________ Before you insult a man, you should first walk a mile in his shoes. So, when you DO insult him, you are a mile away, and you have his shoes!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-30-2008, 11:24 AM	#2
Jones Brandon Senior Member Join Date: Aug 2007 Posts: 241 Downloads: 132 Uploads: 1	nice!!!!!!!!!!!!!!!

08-30-2008, 02:49 PM	#3
Stev0 Senior Member Join Date: Jan 2006 Posts: 2,585 Downloads: 105 Uploads: 1	I'm rather fuzzy on what has been changed despite reading the actual changes.

09-01-2008, 09:52 AM	#9
Nothing Longtime Member Join Date: Sep 2006 Posts: 2,068 Downloads: 206 Uploads: 5	i dont like that they whant more money for the upgrade

09-01-2008, 11:00 AM	#11
brad4ds Newbie Join Date: Jun 2007 Posts: 10 Downloads: 84 Uploads: 0	That is NOT what the site says: "Pepakura Designer 3 is a shareware product, the shareware fee is US$38. (If you have a licence for Pepakura Designer 2, you can upgrade to Ver.3 for US$10. We offer a free upgrade licence if you bought Pepakura Designer 2 after August 1, 2008.)" As long as you have a license for Pepakura Designer 2, it only costs US$10 to upgrade. (I bought it 2 days before August 1, 2008, so it's gonna cost me $10, too. UGH!)

09-01-2008, 12:39 PM	#13
Stev0 Senior Member Join Date: Jan 2006 Posts: 2,585 Downloads: 105 Uploads: 1	It's not a lot if you use it often.

09-07-2008, 10:01 AM	#14
Nothing Longtime Member Join Date: Sep 2006 Posts: 2,068 Downloads: 206 Uploads: 5	any one figure how to change flap size in 3?

09-07-2008, 10:02 AM	#15
Nothing Longtime Member Join Date: Sep 2006 Posts: 2,068 Downloads: 206 Uploads: 5	anyone figure how to change flap size in3?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why would Pepakura Designer be running so slow?	Millenniumfalsehood	Gallery & Designs	7	02-12-2008 08:53 AM
Pepakura Designer 2	paper-toys	Feedback & Support Forum	12	06-23-2007 05:32 PM
opening kmz files in Pepakura Designer 2.0	poggly	Software	1	02-02-2007 12:47 PM
pepakura designer	rkelterer	Tutorials	50	05-03-2006 04:56 PM
New designer	STR	Introductions	14	08-01-2005 04:18 PM