Mad Max Interceptor

Cláudio Dias · 01-30-2007, 06:35 PM

Hi folks,

Results from the poll and comments at paperinside.com indicates Mad Max Interceptor as the next ar to be modeled at paperinside.

It's very hard to find pictures - specially spec's pictures - of this car.

Any help will be welcome!

Thanks in advance!

01-30-2007, 06:59 PM

I had the same problem when I was developing a "SSP Smash Up Derby" version for a toy company. Here's the diagram I made below. The proportions are accurate (just take out the big wheel

).

There was another V8 Interceptor that was being designed, but I don't know what happened to it.

BTW, the dotted lines are where the wheel SHOULD be.

rojo · 01-30-2007, 09:54 PM

SSPs were the best toy EVER! I had two of them: the "Laker Special" in metallic red finish and the "Ramjet". I can still remember that cool sound they made when you pulled the ripcord!

Gearhead · 01-30-2007, 10:43 PM

Hi Claudio,

Here is a blueprint of a 1973 XB Ford Falcon Coupe, the basis of the Mad Max Interceptor.

I do not know who produced the blueprint, but I expect that as you are only using for reference it should not be a problem.

Good luck.

Gearhead

Bad_Scorpion · 01-31-2007, 12:56 AM

Are you basing it on the road warrior version or the Mad Max first movie version? As the first movie didn't have the rear tanks like that. Shame they blew it up in road warrior. If you need some screens of it from the dvds let me know as I have all three on dvd. Other models you've done looking good though. I'm really wanting this one as anything ford is pretty much an intereset to me.

Cláudio Dias · 01-31-2007, 07:17 AM

Armorman, Gearhead,

Thanks for pics! I'll sure use them!

Bad Scorpion,

I do prefer the version with the tanks. Can you send some pics from the movie - specially from car interior and external details?

Thank you

Bad_Scorpion · 01-31-2007, 11:57 AM

Sure no problem. Internally is pretty stripped out but will get the shots for you.

Cláudio Dias · 01-31-2007, 12:15 PM

Bad Scorpion,

In the front of the car, the bottom part was removed, revealling axis and gears.

Does the movie show some close up of the front?

Thank you again!

Cláudio Dias · 01-31-2007, 12:18 PM

Bad Scorpion,

another question: Does it have glasses? Ou just the front one?

01-31-2007, 12:49 PM

the blue line on the front of mine is where the fenders end when it lost the grill and front end detailing.

Cláudio Dias · 01-31-2007, 01:00 PM

Thank you Armorman!

57townsman · 01-31-2007, 02:17 PM

This site might help. I think someone posted it before during your voting.

http://www.madmaxmovies.com/cars/int.../history1.html

SteveK

Cláudio Dias · 01-31-2007, 02:20 PM

Steve,

I've already known this site. Thank you anyway!

01-31-2007, 07:24 PM

townsman,

wow, the old Monogram Rommel's Rod model for your sig....man that brings back memories!

Back on subject (kinda):

Did you know there was a prototype slot set made with the interceptor and Humongus' ride (could wreck 'em too)?

57townsman · 01-31-2007, 07:48 PM

Armorman,

These are my favorite p****** models from days gone by.

Maybe someday they will be in paper too

And now, back to the tread already in progress...

01-30-2007, 06:35 PM	#1
Cláudio Dias Senior Member Join Date: Nov 2006 Location: São Paulo / Brazil Posts: 496 Downloads: 9 Uploads: 0	Mad Max Interceptor Hi folks, Results from the poll and comments at paperinside.com indicates Mad Max Interceptor as the next ar to be modeled at paperinside. It's very hard to find pictures - specially spec's pictures - of this car. Any help will be welcome! Thanks in advance!

01-31-2007, 12:56 AM	#5
Bad_Scorpion Senior Member Join Date: Jul 2006 Posts: 400 Downloads: 58 Uploads: 0	Are you basing it on the road warrior version or the Mad Max first movie version? As the first movie didn't have the rear tanks like that. Shame they blew it up in road warrior. If you need some screens of it from the dvds let me know as I have all three on dvd. Other models you've done looking good though. I'm really wanting this one as anything ford is pretty much an intereset to me. __________________ Working Frenzy from Transformers Movie 2007. Next up is a detailed Tekkaman Blade and Pegas.

01-31-2007, 11:57 AM	#7
Bad_Scorpion Senior Member Join Date: Jul 2006 Posts: 400 Downloads: 58 Uploads: 0	Sure no problem. Internally is pretty stripped out but will get the shots for you. __________________ Working Frenzy from Transformers Movie 2007. Next up is a detailed Tekkaman Blade and Pegas.

01-31-2007, 02:17 PM	#12
57townsman Senior Member Join Date: Jan 2004 Location: Cypress, CA Posts: 435 Downloads: 168 Uploads: 2	This site might help. I think someone posted it before during your voting. http://www.madmaxmovies.com/cars/int.../history1.html SteveK __________________ Outside of a dog, a book is probably man's best friend. Inside of a dog, it's too dark to read. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-30-2007, 09:54 PM	#3
rojo Member Join Date: Oct 2006 Posts: 48 Downloads: 9 Uploads: 0	SSPs were the best toy EVER! I had two of them: the "Laker Special" in metallic red finish and the "Ramjet". I can still remember that cool sound they made when you pulled the ripcord!

01-31-2007, 07:17 AM	#6
Cláudio Dias Senior Member Join Date: Nov 2006 Location: São Paulo / Brazil Posts: 496 Downloads: 9 Uploads: 0	Armorman, Gearhead, Thanks for pics! I'll sure use them! Bad Scorpion, I do prefer the version with the tanks. Can you send some pics from the movie - specially from car interior and external details? Thank you

01-31-2007, 12:15 PM	#8
Cláudio Dias Senior Member Join Date: Nov 2006 Location: São Paulo / Brazil Posts: 496 Downloads: 9 Uploads: 0	Bad Scorpion, In the front of the car, the bottom part was removed, revealling axis and gears. Does the movie show some close up of the front? Thank you again!

01-31-2007, 12:18 PM	#9
Cláudio Dias Senior Member Join Date: Nov 2006 Location: São Paulo / Brazil Posts: 496 Downloads: 9 Uploads: 0	Bad Scorpion, another question: Does it have glasses? Ou just the front one?

01-31-2007, 12:49 PM	#10
ARMORMAN Posts: n/a Downloads: Uploads:	the blue line on the front of mine is where the fenders end when it lost the grill and front end detailing.

01-31-2007, 01:00 PM	#11
Cláudio Dias Senior Member Join Date: Nov 2006 Location: São Paulo / Brazil Posts: 496 Downloads: 9 Uploads: 0	Thank you Armorman!

01-31-2007, 02:20 PM	#13
Cláudio Dias Senior Member Join Date: Nov 2006 Location: São Paulo / Brazil Posts: 496 Downloads: 9 Uploads: 0	Steve, I've already known this site. Thank you anyway!

01-31-2007, 07:24 PM	#14
ARMORMAN Posts: n/a Downloads: Uploads:	townsman, wow, the old Monogram Rommel's Rod model for your sig....man that brings back memories! Back on subject (kinda): Did you know there was a prototype slot set made with the interceptor and Humongus' ride (could wreck 'em too)?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tie Interceptor	loafandjug	Science Fiction & Fantasy	2	03-23-2007 07:21 PM
UFO Interceptor and others	PapaBear	Internet Finds	11	07-28-2006 10:29 AM