Cinedome or cinedrome? - Page 2

Lighter · 06-26-2012, 01:19 PM

Later today - evening? I'll post more photos which will give you a better look at the proportions. Some head on elevations. The model is buried in a poorly marked box from moving a few months back.

06-26-2012, 05:40 PM

Any data you can supply will be fine. My weak points are graphics. Maybe we can bash something together.

Lighter · 06-26-2012, 06:37 PM

Here are more photos before the parking area, sidewalks and other details were added. The Quonset is 40 feet by twenty feet in HO scale. The addition is about twenty wide by thirty deep.

I do have a file with the all the signage I used in both HO and N scales. However, I don't want to provide a JPG since the quality isn't top notch or even seventh notch. I'll think about how to post or provide that file.

Lighter · 06-29-2012, 08:25 PM

Quote:

Originally Posted by Zathros

Any data you can supply will be fine. My weak points are graphics. Maybe we can bash something together.

Photos and other info posted Tuesday. Waiting for moderator approval.

06-30-2012, 01:54 AM

It's weird how the software flags some files. It was down last night for maintenance and I missed it. Those pictures give great reference. If you could give me the length of the Quonset hut, the height, and the same for the building, I should be able to extrapolate the rest. If you have a set of vernier calipers, that would be cool. Accurate measure measurements opposed to a scale next to it would be highly appreciated.

If that seems much, straight on shots are the best. Perspective (shots at an angle) are really hard to work with. Great for detail, but straight on shots from all sides (they don't have to be the same size), will allow me to scale them and make an accurate model.

07-03-2012, 11:09 AM

Thanks for the Data!

07-06-2012, 03:41 AM

I haven't forgotten this!

Badyin Macfadyi · 08-04-2012, 05:28 PM

Thanks. I found a couple of Sodders Hut kits Unfortunately they don't seem to be complete so hunting for something useable on Fleabay

Ian

08-05-2012, 10:36 AM

If someone can give me the length ( of model, not the real structure), of just the Qounset hut, and the height, I will bang out the structure with minimal graphics that maybe someone else can enhance. I could also do a white line version.

06-26-2012, 01:19 PM	#16
Lighter Member Join Date: Jun 2012 Posts: 23 Downloads: 13 Uploads: 0	Later today - evening? I'll post more photos which will give you a better look at the proportions. Some head on elevations. The model is buried in a poorly marked box from moving a few months back. __________________ Lighter Virginia

06-26-2012, 06:37 PM	#18
Lighter Member Join Date: Jun 2012 Posts: 23 Downloads: 13 Uploads: 0	Here are more photos before the parking area, sidewalks and other details were added. The Quonset is 40 feet by twenty feet in HO scale. The addition is about twenty wide by thirty deep. I do have a file with the all the signage I used in both HO and N scales. However, I don't want to provide a JPG since the quality isn't top notch or even seventh notch. I'll think about how to post or provide that file. __________________ Lighter Virginia

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-26-2012, 05:40 PM	#17
Zathros Posts: n/a Downloads: Uploads:	Any data you can supply will be fine. My weak points are graphics. Maybe we can bash something together.

06-30-2012, 01:54 AM	#20
Zathros Posts: n/a Downloads: Uploads:	It's weird how the software flags some files. It was down last night for maintenance and I missed it. Those pictures give great reference. If you could give me the length of the Quonset hut, the height, and the same for the building, I should be able to extrapolate the rest. If you have a set of vernier calipers, that would be cool. Accurate measure measurements opposed to a scale next to it would be highly appreciated. If that seems much, straight on shots are the best. Perspective (shots at an angle) are really hard to work with. Great for detail, but straight on shots from all sides (they don't have to be the same size), will allow me to scale them and make an accurate model.

07-03-2012, 11:09 AM	#21
Zathros Posts: n/a Downloads: Uploads:	Thanks for the Data!

07-06-2012, 03:41 AM	#22
Zathros Posts: n/a Downloads: Uploads:	I haven't forgotten this!

08-04-2012, 05:28 PM	#23
Badyin Macfadyi Member Join Date: Mar 2005 Location: Netherlands Posts: 150 Downloads: 13 Uploads: 0	Thanks. I found a couple of Sodders Hut kits Unfortunately they don't seem to be complete so hunting for something useable on Fleabay Ian

08-05-2012, 10:36 AM	#24
Zathros Posts: n/a Downloads: Uploads:	If someone can give me the length ( of model, not the real structure), of just the Qounset hut, and the height, I will bang out the structure with minimal graphics that maybe someone else can enhance. I could also do a white line version.