building my own snowspeeder - Page 16

DanBKing · 03-12-2013, 06:15 PM

Quote:

Originally Posted by dnalor

when i drove home from work i thought about a kind off clicking to lock the flaps in a position..
Then i have to make teeth on the mechanics.. or something like that..

A bit like the legs on a wooden deck chair ....

Hyde_Park_deck-chairs_-_geograph_org_uk_-_800825.jpg

dnalor · 03-12-2013, 06:32 PM

yeah something like that...

dnalor · 03-18-2013, 09:47 AM

Yes i think it works.
it looks a little like this.

the parts on the back will be hidden in back engine outlet.
But still i have no solution about to keep up when the heavy flap is installed.

10587

Rogerio Silva · 03-18-2013, 11:40 AM

Dnalor

You're the man! That's a wonderful work...

DanBKing · 03-19-2013, 02:52 PM

Some sweet paper engineering going on there........

dnalor · 04-18-2013, 06:32 AM

Damn....
i work to slow..
I'm still getting a little detail on the engine....

11172

dnalor · 05-16-2013, 02:30 PM

somehow the engines don't flow when building. it's soooooo slow...
I spray painted the inside of the details..
and started to build the outside of the engines.
i had to build the armour plates and glue them on the outside.
I was almost ready and it got damaged when they cleaned the office where i'm building the snowspeeder.
They sprayed all water over the engine and the color of the armour is damaged.
now , i am glueing a new sheet with gray colors over the plates i installed.
I hope it looks a little good or else i can start all over again.

tomorrow i will make a picture of the engine.

dnalor · Yesterday, 07:07 AM

here you see a sideview where one panel is still not renewed.
you see the blue water damage..
That is allready covert.

i'm getting started with the back rond engine part.

Rogerio Silva · Yesterday, 07:15 AM

Dnalor

Well, setbacks are expected when things are not totally under your control. You couldn't predict the cleaning of the office would turn into a disaster for your model...

Anyway, your work so far has been an inspiration for all of us, so keep it up!

I think your solution of glueing a paper on top of the color damaged pieces will work fine, for I've had the same problem and the fix was cool, very hard to notice.
So go for it, man!

03-12-2013, 06:32 PM	#227
dnalor Senior Member Join Date: Oct 2011 Location: Belgium Europe Posts: 644 Downloads: 6 Uploads: 0	yeah something like that... __________________ Building : Snowspeeder , Y wings Ready : X-wing, Millenium falcon, R4-D4. Want to: uhu02 Tie-Fighter, uhu02 x wing, Imcold xwing red2

03-18-2013, 11:40 AM	#229
Rogerio Silva Senior Member Join Date: Nov 2012 Location: Rio de Janeiro - BRAZIL !!! Posts: 598 Downloads: 9 Uploads: 0	Dnalor You're the man! That's a wonderful work... __________________ Greetings from Brazil! No modeling, just studying for PMP certification exam. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. And it's NOT Paper Modeling Professor! I'm not even close to that...

03-19-2013, 02:52 PM	#230
DanBKing Senior Member Join Date: Feb 2012 Location: Netherlands Posts: 505 Downloads: 21 Uploads: 0	Some sweet paper engineering going on there........ __________________ Once a King, Always a King, but once a Knight, is enough!

05-16-2013, 02:30 PM	#232
dnalor Senior Member Join Date: Oct 2011 Location: Belgium Europe Posts: 644 Downloads: 6 Uploads: 0	somehow the engines don't flow when building. it's soooooo slow... I spray painted the inside of the details.. and started to build the outside of the engines. i had to build the armour plates and glue them on the outside. I was almost ready and it got damaged when they cleaned the office where i'm building the snowspeeder. They sprayed all water over the engine and the color of the armour is damaged. now , i am glueing a new sheet with gray colors over the plates i installed. I hope it looks a little good or else i can start all over again. tomorrow i will make a picture of the engine. __________________ Building : Snowspeeder , Y wings Ready : X-wing, Millenium falcon, R4-D4. Want to: uhu02 Tie-Fighter, uhu02 x wing, Imcold xwing red2

Yesterday, 07:15 AM	#234
Rogerio Silva Senior Member Join Date: Nov 2012 Location: Rio de Janeiro - BRAZIL !!! Posts: 598 Downloads: 9 Uploads: 0	Aaaaaaaaaarrrrrrrrggggggggggh!!!!!!!!! Dnalor Well, setbacks are expected when things are not totally under your control. You couldn't predict the cleaning of the office would turn into a disaster for your model... Anyway, your work so far has been an inspiration for all of us, so keep it up! I think your solution of glueing a paper on top of the color damaged pieces will work fine, for I've had the same problem and the fix was cool, very hard to notice. So go for it, man! __________________ Greetings from Brazil! No modeling, just studying for PMP certification exam. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. And it's NOT Paper Modeling Professor! I'm not even close to that...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Incom T-47 Snowspeeder	loenf	Science Fiction & Fantasy	3	05-12-2010 02:17 AM
Snowspeeder vs. At-At	loenf	Internet Finds	6	09-22-2008 03:00 PM
Star Wars Snowspeeder	loenf	Science Fiction & Fantasy	13	05-28-2008 03:18 AM
Snowspeeder....don't know if this one was posted or not...	ARMORMAN	Internet Finds	0	06-10-2005 12:11 AM
Star Wars Snowspeeder	sruch	General Card Modeling	4	03-07-2004 04:28 PM