star wars pepakura helmets

[Rissa]

Originally Posted by Vortex_4200

I would be intrested

Still here!!

Looks like the secondary guy, disappeared just like the first one..BUT:

There is a person on TheRPF.COM..who is offering files.

The RPF has a very healthy Pepakura following there, and I am slowly learning quite a bit...

Also a few massive failures have helped!!

But, Im getting there.

I dont remember if you have to be a member or not..But I would suggest looking at this discussion:

http://www.therpf.com/f24/fierfeks-s...lopment-122071/

Hope that helps you out some.

You might also find this interesting also:
http://www.therpf.com/f24/what-pepak...e-made-123626/


Good luck!





---
Respect the author's work.

[Rissa]

Originally Posted by MTK

Those are freakin awesome..... Uh... One thing though... Er... uh.... There's no copyright information for any of those models. I happen to know who made most of them and....... Well.... Maybe someone should talk to someone before all hell breaks loose and in this economy they try to sue everyone!

Well..from what I understand from reading the group the pep files there belong to the guy who started the thread.

The First Paragraph:

"I decided to make a thread for my pep files, to keep my other projects focused. Furthermore, I plan on releasing many new files for Star Wars pepakura enthusiasts, because I think there should be more great star wars peps out there. Since I was making these files anyway I thought many would find good use for these files if I shared them. So, here's some files I'm working on:"

Also..on that board..I know there are MANY pep makers on that board who also visit other boards. And that they are VERY active about making sure that only that persons work is being put out there. I've seen some stuff dissapear, when someone was told that it belonged to another...and as active is that thread is..im pretty sure its being watched.

And when the unfold is done by another member helping him out...he gives them credit in his links too.

[zwave343]

hey! that bottom link sent me to a person ive been tryin to get a hold of for a while! woot!

[ZombieHunter]

Beautiful work. The paint job on the one looks fantastic. I've made 3 models now and am getting better, but I'm stunned by the accuracy of your work.

[Sackfalte]

Nice work!

[Dave Ward]

That's a great paint job on that bucket. I've been following a lot of youtube tutorials on reinforcing with resin and it does seem like a quick way to make the piece solid. Much better than working with foam IMHO.

[dnalor]

Those helmet rock...
i'm working at this moment at my x-wing..
But would love to build a havok trooper suit..(TOR)
i found the helmet at therpf..
now i have to look for the rest of the suit for my treasure-usb stick.

and one day i will try this..

[dnalor]

i installed that pepakura program..
and loaded that Havok trooper helmet..

but how do you know what the size of it will be?

[Millenniumfalsehood]

At the bottom right corner the HxWxD dimensions are listed, in centimeters.

[dindandut]

I've send a PM, and waiting for your kindness.

[ureeka2k]

nice job on the lids bro, (to harden) i personally brush on smooth-on 320 on the outside (320 only take 30 min to set up, it soaks in paper very well making it pretty much a plastic helmet) then i slosh a little smooth-on 321 on the inside (cause it only take 10 min to set) i use this method because it isn't producing a toxic smell and can be used inside (at a craft table or kitchen table). then when it is as hard and thick as you want it you can use a lil bondo to detail it.

[grifco2000]

Hmm, I have never heard of 320 or 321. What is its chemical content??? Grifco

[ureeka2k]

Originally Posted by grifco2000

Hmm, I have never heard of 320 or 321. What is its chemical content??? Grifco

http://www.smooth-on.com/Urethane-Pl...210/index.html

[grifco2000]

Originally Posted by ureeka2k

http://www.smooth-on.com/Urethane-Pl...210/index.html

Thanks, much appreciated. Will have to do some research. (rubs hands together whilst hiding info from missus)

[ureeka2k]

My biggest problem using fiberglass was the mess and smell. I HAD to do it outside when the weather permitted. With the 320 and 321 I get to work on my stuff inside whenever I want