Building my own x-wing

[dnalor]

Thanks for all the kind words..
The cockpit looks great in reallife..
But i hope i can install it in the x wing...
somehow there isn't much space for the cables.

in the meanwhile i finished the first gun....AND DAMN...i hope i the 4th gun looks like the same as the first (its really difficult for me)

[zombieofthepast]

Beautiful. That is all.



.

[dnalor]

Almost ready..
Just a few little parts..and finally ready to attach them to the fuselage.

first the cockpit..

[dnalor]

today all Leds are running in the cockpit..
but the next problem is...it doesn't fit in the fuselage..
so i have to cut some space in one of the ribs...

That idea of Zathros wasn't that bad
I should start to listen to other people then this would be easy

It looks like you can cut the back fuselage former and stuff them in there, This is what I thought was going to happen. I used to have friends that made harnesses for every helicopter Sikorsky made,. They would lay the harness on a full sized board that had the full outline of the helicopter with areas coded represented solid walls, holes, etc., so they would know how the harness was going to look, and where to have disconnects. The wiring looks like it could be significantly reduced by using the micro crimp connectors. This would essentially have all the power leads to thee covered LED bulbs terminate at the firewall behind the seat. You could actually make that panel a board to plug the power leads into by making it an electronics panels such that if any repairs are needed, you mere pull a wire out of a hole and replace whatever may be necessary.

I attached a drawing to try and explain what I mean. It's not to scale, or the right shape, a represenatation, but it conveys the idea. It's kind of a panel box, without the box. Tinning the wire ends with solder would allow them to act as pins you would insert into the connectors. I would solder the power side into the pins. 1MM card stock and some crazy glue will hold the pins in place (plus a tight hole). This would allow you to place the wires flush against the fuselage. and the LED's inside the nose, or wherever is necessary.

Just a suggestion. It adds a lot of work though. Nothing more than a suggestion that popped into my head.

[dnalor]

That connector part is a smart thing..
only i don't know if i want to repair a lightbulb when its burned out.
when i installed LEDS i hope they will last around 50.000 hours..
when the x wing will last also that long i'm a Very happy guy...when a few years shorter then just a happy one

So that fuselage-backformer will have to go or will be cut so that i have a little more space...

I can totally understand that. It's one of those things if you made an access panels, and had the LED's pushed in, with short Fiber Optics pieces 3 mm or so, sticking through the panel, it would be a good idea.

Like you say, these bulbs last for ever, except if they get a power surge. Otherwise, you will probably never need to replace them. It's looking great!

[THE DC]

This is truely an inspiring effort.

Watching closely.

The DC

[dnalor]

YES it's in.
Tomorrow i need to take my laptop for testing the light....i hope they survived the installing
Then i can glue the cockpit in his final place..


YES

[DanBKing]

Have you got the cd player, amps and speakers installed yet ....???.

[dnalor]

hum...
i ordered a television large enough for some fun.....
when it works

[dnalor]

Yes all leds are working

cockpit is glued and back piece installed.

[ureeka2k]

wow, that is incredible. love the size and detail, how are you going to display it when you are finished with the build?

[dnalor]

Well i want to place the x wing in flightmode against the wall, in my computer-room
one wall has the millenium falcon..
now another wall gets the x wing....when every thing goes how i plan

Then i have 2 walls left...

[DanBKing]

PLLEEEEAASSSEEEEEE can I get in and fly her????????????

Looks like you could.....!!! Nice job!

Ik heb net glasvezel in mijn huis geinstaleerd..... De monteur heb me rond 10m kabel, wat bestaat uit 96 individueel vezels, gebundeld in 9x12, achtergelaten......

Is die soort gebruikbaar voor modellen, en wat moet ik doen om er te testen???

I'm thinking it might come in handy for the Space Staion V model (yet to be built) for lighting.......... Sorry for the cr*p Dutch!! Even though your Belgian..